UPS HAT (C) For Raspberry Pi Zero, 5V Uninterruptible Power Supply, Multi Battery Protection Circuits

• Uninterruptible Power Supply For Pi Zero
• Power Your Pi Zero Seamlessly From Power Connection OR The Backup Batteries
• Supports Recharging And Regulated 5V Output At The Same Time, I2C Monitoring

SAFETY CAUTIONS:

• Li-ion and Li-po batteries are quite unstable. They may cause fire, personal injury, or property damage, if they're not properly recharged or used.
  
• Do not reversely connect the polarities when recharging or discharging the battery. Do not use inferior charger/charging panel to recharge the battery.
• Do not mix use old batteries with new ones, avoid using batteries of different brands.
• When buying Lithium battery, should always make sure the battery specification is compatible with the expansion board. Choose batteries from formal manufacturer, and ensure the batteries will work stably and safely by aging test.
• Lithium batteries have limited cycle life, they will also deteriorate as time goes by. Should be replaced with new ones when the batteries reaching their max cycle life, or working over two years, whichever comes first.
• Should be placed carefully and properly, keep it away from inflammables and explosives articles, away from children, avoid any safety accident caused by careless storage.

Features:

The UPS HAT (C) is an uninterruptible power supply module specialized for Raspberry Pi Zero series. It incorporates Li-po battery switching charger with path management, voltage boost chip, and voltage/current monitor which allows monitoring the battery operating status via I2C bus.

• Onboard spring pogo pins for connecting with Raspberry Pi Zero series boards
  
• Li-po battery recharge chip, with dynamic path management, more stable power supply
• Voltage boost chip, providing regulated 5V power output
• I2C bus communication, monitoring the battery voltage, current, power, and remaining capacity in real time
• Multi battery protection circuits: over charge/discharge protection, over current protection, and short circuit protection, more safe and stable
• Recharging indicator for monitoring the battery operating status
• Comes with development resources and manual

Specifications:

Uninterruptible Powers:

• It is able to recharge the battery and provide power output at the same time from external power supply
• Automatically switch over to battery output if external power supply is unavailable, keeps the system running without any trouble

for reference ONLY, the Raspberry Pi Zero, display module, and MicroSD card are NOT included.

Pogo Pin Connector:

• Supports Raspberry Pi Zero Series (Pinheader Should Be Soldered),
• Allows Attaching Other HATs On The Top

Real Time Monitoring:

• Monitoring The Battery Voltage, Current, Power, And Remaining Capacity Via I2C
• When the voltage dips too low, it is possible to save files properly and then shutdown the system by software, to avoid any data loss

What's On Board:

1. ETA6003: recharge manager
   
2. TPS61088: voltage boost chip
3. INA219: voltage/current monitor
4. S8261: Li-po battery protection chip
5. FS8205: Li-po battery protection MOS
6.  Pogo pins: for connecting with Raspberry Pi Zero
7. USB recharge port: 5V charger input
8. Battery header: for connecting 803040 Li-po battery
9. Power indicator
10. Recharging indicator

Pinout Definition:

Outline Dimensions:

Documentation:

• Wiki

Package Includes:

• 1 x UPS HAT (C)
• 1 x 1000mAh Li-po battery
• 1 x Screws pack