• Advanced Color ePaper (ACeP) technology, supports 7-Color display
• No backlight, keeps displaying last content for a long time even when power down
• Ultra low power consumption, basically power is only required for refreshing
• Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
• SPI interface, for connecting with controller boards like Raspberry Pi/Jetson Nano/Arduino/STM32, etc.
• Onboard voltage translator, compatible with 3.3V/5V MCUs
• Comes with development resources and manual(driver board schematic, examples for Raspberry Pi/Arduino/STM32)
• Weight: 0.062 kg

Specifications:

Advantages Of EINK:

• E-paper display utilizes microcapsule electrophoretic technology for displaying, the principle is: charged particles suspended in clear fluid will move to sides of microcapsule when electric field is applied, making the microcapsule become visible by reflecting ambient light, just as traditional printed paper.
• E-paper display will clearly display images/texts under lamplight or natural light, requires no backlight, and features nearly up to 180° viewing angle. It is usually used as e-reader due to its paper-like effect.

• Standard Raspberry Pi 40PIN GPIO Header
• Compatible With Raspberry Pi Series Boards, Jetson Nano

• Onboard SPI Control Interface
• For Use With Controller Boards Like Raspberry Pi/Jetson Nano/Arduino/STM32

• VCC         Power (3.3V / 5V input)
• GND Ground
• DIN         SPI MOSI pin
• SCLK  SPI SCK pin
• CS       SPI chip selection, low active
• DC       Data/Command selection (high for data, low for command)
• RST       External reset, low active
• BUSY     Busy status output pin

                                     Outline Dimensions

Documentation:

• WIKI
  

Package Includes:

• 1 x 7.3inch e-Paper (F)
  
• 1 x Driver Board and FFC cable
• 1 x PH2.0 20cm 8Pin
• 1 x RPi screws pack (2pcs)