Compute Module IO Board With PoE Feature, Composite Breakout Board For Developing With Raspberry Pi CM4S / CM3 / CM3L / CM3+ / CM3+L

Compute Module PoE Board

For Evaluating The Raspberry Pi Compute Module Or Being Integrated Into End Products

Suitable for CM4S / CM3 series boards

Version Options

• Compute Module PoE Board(the base board only)
• the base board + CM4S08032 (8GB RAM, 32GB eMMC Flash)

Features:

• Raspberry Pi GPIO header, for connecting sorts of Raspberry Pi HATs
• 10/100M auto-negotiation Ethernet port, with PoE enabled
• 4x USB ports, allows connecting more USB devices
• 2x CSI camera interfaces
• Onboard HDMI / DSI interfaces for connecting displays
• Onboard USB TO UART, for serial debugging
• Cooling fan interface, auto run on power up OR controlled by IO pins
• Adopts isolated SMPS (Switching Mode Power Supply)

Specifications:

• POE POWER INPUT 37V ~ 57V DC in
• POE POWER OUTPUT 5V 2.5A DC out
• NETWORK STANDARD 802.3af PoE standard
• POWER SUPPLY micro USB port / PoE Ethernet port
• MOUNTING HOLE SIZE 3.2mm
• DIMENSIONS 114mm × 84.4mm

Supports CM4S / CM3 Series Boards

Suitable For Raspberry Pi CM4S / CM3 / CM3L / CM3+ / CM3+L

Supports PoE Power Supply, Onboard Multiple Peripheral Interfaces

Multiple Peripheral Connectors

Reserved Cooling Fan Header

Supports Controlling The Fan Via GPIO Or Direct Running From 5V Power Supply

Note:* for reference only, the cooling fan and the case are NOT included.

Application Example

Suitable For Raspberry Pi Applications Or Other Industrial Context Requiring Binocular Vision Or PoE Power Supply

What's On Board:

Base Board Interfaces

1. Compute Module interface

for connecting Compute Module (CM4S / CM3 / CM3L / CM3+ / CM3+L)

2.Raspberry Pi GPIO header

for connecting Raspberry Pi HATs

3.PoE enabled Ethernet port

10/100M auto-negotiation, for connecting router or switch with PoE function

4. DSI interface

display port, for connecting Raspberry Pi LCD

5. USB ports

4x USB ports, for connecting USB devices

6. CSI interface

2x CSI camera ports, for connecting Raspberry Pi cameras

7. HDMI port

8. USB TO UART interface

for serial debugging

9. USB SLAVE interface

allows you to burn system image into Compute Module

10. Power port

5V 2.5A

11. TF card slot (bottom side)

insert a TF card with pre-burnt system, to start up Compute Module 4S/3/3+ Lite variant

12. Cooling fan interface

Base Board Interfaces

13.LAN9514 (bottom side)

fully-integrated USB hub and 10/100M Ethernet controller

14.Si3404 PoE power management chip (bottom side)

15.CP2102 USB TO UART converter

16.EP13 PoE power transformer

17.Optical isolator

18Two LED indicators

Red: Raspberry Pi power indicator

Green: Raspberry Pi operating status indicator

19.NET network indicator

20.Bridge rectifier

Jumper Instruction

21.VGx power config jumper: config the I/O level

22.UART output config:

Left: connect the CP2102 serial port and Raspberry Pi serial port

Right: disconnect the CP2102 serial port and Raspberry Pi serial port

23.PoE config:

DIS: disable PoE

EN: enable PoE

24.Cooling fan config:

P34: the fan is program controlled via P34 pin

EN: the fan is directly powered from 5V power supply

25.PoE power voltage measuring pads

Compute Module 4S(Optional)

• High Speed EMMC, Low Power Consumption
• Based On The Raspberry Pi 4 Model B Architecture, Compute Module 4S Is Intended For Customers Migrating Or Upgrading From Compute Module 3 / 3+

Completely Upgraded, More Powerful

Upgraded Processor BCM2711, Quad-Core Cortex-A72 64-Bit Processor, More Powerful Performance. Onboard High-Speed EMMC Flash Memory Up To 100 MB/S, 4 Times Faster Than CM3+

Documentation:

• Wiki

Package Includes:

• Only Board
• Compute Module PoE Board x1

• With CM4
• 1 x Compute Module PoE Board 
• 1 x CM4S08032 
• 2 x USB cable ~35cm 
• 1 x OPTIONS 5V 3A Power Supply