0.96inch OLED Display Module

Embedded SSD1315 Driver Chip, SPI / I2C Communication

Comes with examples for Raspberry Pi, Arduino, STM32, etc.

                                         Version Options     

Features:

• Ultra-narrow bezel, conpact size, with onboard voltage translator

• Adopts 4-wire SPI and I2C interfaces, better compatibility, fast data rate

• Comes with online development resources (examples for Raspberry Pi/Arduino/STM32)

• OPERATING VOLTAGE: 3.3V / 5V                       
• RESOLUTION: 128 × 64 pixels                                 
• COMMUNICATION INTERFACE:4-wire SPI / I2C        
• DISPLAY SIZE :21.74 × 11.18 mm                           

• DISPLAY COLOR (c): upper yellow & lower blue; (D): white; (E): blue
• DISPLAY PANEL: OLED
• PIXEL SIZE :0.15 × 0.15 mm
• DRIVER :SSD1315
•  MODULE SIZE: 26.00 × 26.00mm

Control Interface

• RES : Reset, low active

• DC : Data/Command selection (high for data, low for command)
• CS :  Chip selection, low active
• CLK :Clock input
• DIN   :  Data input
• GND   :Ground

• VCC     :Power (3.3V / 5V input)

Hardware Connection:

Connecting With Raspberry Pi Via SPI Interface

Connecting With Arduino Board Via SPI Interface:

Usage Example:

for reference only, the STM32 board is NOT included.

Product Show:

Package Includes:

• 1 x 0.96inch OLED Module
  

• 1 x Jumper cable female-female 7PIN

 Size: 0.96

Resolution :128×64

Display Color :yellow&blue(two blocks)/white/blue (optional)

Interface :SPI/I2C

Display Panel :OLED

Driver :SSD1315

Ultra-narrow bezel, conpact size, with onboard voltage translator

Adopts 4-wire SPI and I2C interfaces, better compatibility, fast data rate

DC :Data/Command selection (high for data, low for command)

CS: Chip selection, low active

CLK: Clock input

DIN: Data input

GND: Ground

VCC :Power (3.3V / 5V input)

1 x OPTIONS 0.96inch OLED Module 

1 x Jumper cable female-female 7PIN