This is a 5V high torque stepper motor with more than 2000 steps per revolution. It has enough torque to move small robots. The motor can be connected with gear shaft and propeller.
Specifications:
- High quality stepper motor
- Voltage: DC 5V
- Diameter: 24mm
- Step Angle: 5.625 x 1/64
- Reduction Ratio: 1/64
Additional Motor Parameters :
- Rated voltage ： 5VDC
- Number of Phase ： 4
- Speed Variation Ratio ： 1/64
- Stride Angle ： 5.625° /64
- Frequency : 100Hz
- DC resistance ： 50Ω±7%(25℃)
- Idle In-traction Frequency : > 600Hz
- Idle Out-traction Frequency : > 1000Hz
- In-traction Torque >34.3mN.m(120Hz)
- Self-positioning Torque >34.3mN.m
- Friction torque : 600-1200 gf.cm
- Pull in torque : 300 gf.cm
- Insulated resistance >10MΩ(500V)
- Insulated electricity power ：600VAC/1mA/1s
- Insulation grade ：A
- Rise in Temperature <40K(120Hz
- Noise <35dB(120Hz,No load,10cm)
- Model ： HN24BYJ01
Note: Product images are for illustrative purposes only and may differ from the actual product.
5V DC Stepper Motor - HN24BYJ01
- Product Code:PRC-Motor-Stepper-5V-HN24BYJ01
- Reward Points:4
- Availability:Out Of Stock
-
रo 280.00
- Price in reward points:375
Related Products
L298N Motor Driver Board
The L298N driver module, using ST' L298N chip, can directly drive two 3-30V DC motor, and provide a ..
रo 195.00
IC - ULN2003A (High Voltage and Current Darlington Transistor Arrays)
The ULN2003A is a high-voltage high-currentDarlington transistor arrays. Each consists of seven npn ..
रo 20.00
L293N Motor Driver Board
This is a medium power motor driver perfect for driving DC Motors and Stepper Motors. It uses the po..
रo 85.00
ULN2003 Five Line Four Phase Stepper Motor Driver Module
Mini ULN2003 Five Line Four Phase Stepper Motor Driver Module. Features and Specifications: ..
रo 85.00
5V DC Stepper Motor - 25BYJ48
This is a 5V high torque stepper motor with more than 2000 steps per revolution. It has enough torqu..
रo 231.00
Grove - I2C Motor Driver
Grove I2C communication motor board.. Its heart is a dual channel H-bridge driver chip tha..
रo 1,978.00
L298 Dual H-Bridge Motor Driver
Double H driver module uses ST L298N dual full-bridge driver, an integrated monolithic circuit in a ..
रo 2,121.00
USB2AX v3.2b
The USB2AX is a small interface to control Dynamixel servos like the AX-12 from a computer. It plugs..
रo 5,066.00
Servo Six Board - Monk Make
The Servo Six board simplifies the process of connecting up to six servo motors to a Raspberry Pi or..
रo 667.00
Grove - Haptic Motor
Grove - Haptic motor is a Grove module integrated with DRV2605L which will give your project more fe..
रo 1,672.00
L298 Dual H-Bridge Motor Driver Module
New L298 Dual H-Bridge Motor Driver Features: Working mode: H bridge ..
रo 235.00
4 Wire 2 Phase Micro Stepper Motor 5V 30 Ohm
4 Wire 2 Phase Micro Stepper Motor 5V 30 Ohm 2-phase 4-wires Voltage: 5V Phase r..
रo 100.00 रo 150.00
Adafruit 2424 Automotive 2424 Gauge Stepper Motor - x27.168
This stepper motor is a little different than the large NEMA-17 types you may be used to. These are ..
रo 1,074.00
5V DC Stepper Motor - 28BYJ48
This is a 5V high torque stepper motor with more than 2000 steps per revolution. It has enough torqu..
रo 223.00
