This WioHeliumMonitor is a plug-and-play LongFi hotspot monitor for the Helium network. It makes sure the Hotspot is connected to the LAN and has access to the Internet, you will also be alarmed when it is not working correctly through Grove-Wio-E5.

This WioHeliumMonitor is a plug-and-play LongFi hotspot monitor for the Helium network. It will tell you if your hotspot is continuously reachable from the local network/LAN connection is working, as well as if your hotspot is continuously accessing the Internet/Internet connection is working correctly.

With the Grove-Wio-E5 and an activated Watchium Silver/Gold subscription, you can also verify if your hotspot LoRaWAN communication(including Witness) is operational. In case of Internet/LAN communication problems, it will report the problem over LoRaWAN, while some other hotspots around are able to receive it.

What is the Watchium application?

WioHeliumMonitor reports information locally and remotely with the Watchium application. An account on the Watchium application is required. A Free Watchium account is good enough for Lan / Internet connection monitoring. The Silver (1HNT) / Gold (3HNT) version is required for the LoRaWan listed options. This option includes all the LoRaWan communications.

About Wio Terminal

Wio Terminal is compatible with Arduino and Micropython. It is built with an ATSAMD51 microcontroller with wireless connectivity supported by Realtek RTL8720DN. Its CPU speed runs at 120MHz (Boost up to 200MHz). Realtek RTL8720DN chip supports both Bluetooth and Wi-Fi providing the backbone for IoT projects. The Wio Terminal is Highly Integrated with a 2.4” LCD Screen, there is an onboard IMU(LIS3DHTR), microphone, buzzer, microSD card slot, light sensor, and infrared emitter(IR 940nm).

Features :

Long Range Hotspot Monitoring: this product is to monitor your Helium Hotspot in real-time and remotely.
plug-and-play: Compact size makes it easier to bring the device anywhere.
Reporting misinformation with APP: WioHeliumMonitor reports information locally and remotely with the Watchium application.
Alarm to Remind: any problem detected will raise a local alarm sound.
Friendly Interface Display: Directly display network and hotspot information on the Wio Terminal screen.

Specifications :

Yes, it will. You just need to update the wifi stack

Main Chip	Manufacturer Part Number	ATSAMD51P19
	Core Processor	ARM® Cortex®-M4F running at 120MHz
	Memory	4 MB External Flash, 192 KB RAM
	Maximum Speed	200MHz
	External Flash	4MBytes
	Operating Temperature	-40°C ~ 85°C (TA)
LCD Screen	Resolution	320x240
	Display Size	2.4inch
	Drive IC	ILI9341
Wireless Connectivity	Manufacturer Part Number	RTL8720DN
	KM4 CPU	ARM® Cortex®-M4F @ 200MHz
	KM0 CPU	ARM® Cortex®-M0
	Wi-Fi	802.11 a/b/g/n 1x1, Dual Band 2.4GHz & 5GHz
	Bluetooth	Support BLE5.0
Built-in Modules	Accelerometer	LIS3DHTR
	Microphone	1.0V-10V -42dB
	Speaker	≥78dB @10cm 4000Hz
	Light Sensor	400-1050nm
	Infrared Emitter	940nm
Interface	MicroSD Card Slot	Maximum 16GB
	GPIO	40-PIN (Raspberry Pi Compatible)
	Supported Protocol	SPI, I2C, I2S, ADC, DAC, PWM, UART(Serial)
	Grove	2 (Multifunction), for Digital, Analog, I2C, and PWM
	FPC	20-Pins
	USB Type-C	Power & USB-OTG
Operation Interface	5-Way Switch
	Power/Reset Switch
	User-defined button *3
Enclosure	Mouting	Built-in magnets and two mounting holes
	Dimension	72mm57mm12mm
	Materials	ABS+PC
Software Support	Arduino
	MicroPython
	ArduPy
	AT Firmware
	Visual Studio Code
	CircuitPython ( How to run CircuitPython on Wio Terminal?)
Grove - Wio-E5
Voltage Supply:	3.3V / 5V
Power Output:	Up to +20 dBm at 3.3V
Working Frequency	868MHz / 915MHz
Protocol	LoRaWAN
Sensitivity	-116.5dBm ~ -136dBm
Modulation	Long Range , (G)FSK, (G)MSK and BPSK
Current	Only 60uA in sleep mode
Size	20*40mm
Working Temperature	-40℃ ~ 85℃