Lithium primary battery to back up the Real Time Clock
The below listed ODROID boards has RTC circuit. You need to just connect this backup battery to keep the time when your ODROID is offline. This battery can keep the RTC running up to 3 years without external power supply.
The list of the board that RTC circuit implement.
ODROID-XU4
ODROID-XU3 / XU3Lite
ODROID-C1 / ODROID-C1+
ODROID-U3
ODROID-XU / XULite
Specification
Coin Cell : CR2032 3Volt/220mAH
Wire : 70mm
Connector : Molex 51021-0200 compatible (1.25mm pitch)
Note:
The supplier of the product has no replacement and/or refund policy as part of their product warranty/guarantee. Furthermore, the repair cost and the cost of shipping to and fro from South Korea has to be borne. As Fab.to.Lab is merely an intermediary we extend the exact same warranty terms to all customers of Harkernel.
Please find more details here: Supplier warranty terms and conditions: https://www.hardkernel.com/agreement/
Cable connection. Note that the red wire is Positive pole and the black wire is Negative pole.
RTC Backup Battery
Product Code:Hdk-C2-RTC-Battery Reward Points:3 Availability:In Stock
रo 329.00
Price in reward points:329
40 or more रo 326.00 80 or more रo 325.00 200 or more रo 323.00 400 or more रo 321.00
Related Products
Features:
31 x 8 RAM for scratchpad data storage
Serial I/O interface for minimum pin count
..
रo 160.00
Add to Cart
Tiny RTC I2C DS1307 Real Time Clock Module ARM PIC for Arduino
Features:
The DS1307 I2C ..
रo 106.00
Add to Cart
ODROID-XU4 is a new generation of computing device with more powerful, more energy-efficient hardwar..
रo 5,933.00 रo 6,969.00
Add to Cart
Real Time Clock Shield for the ODROID-C2
Just mount this RTC Shield on the GPIO port of the ODR..
रo 592.00
Add to Cart
For those who wants to protect the ODROID-M1S board from dust and the elements. This is an optional ..
रo 526.00
Add to Cart
The SD2405AL is dual power supply system. When the primary power supply goes down to an assigned val..
रo 717.00 रo 827.00
Add to Cart
ODROID-MC1 Solo
is one single unit out of ODROID-MC1 : My Cluster One with 32 CPU Cores and 8G..
रo 6,312.00
Add to Cart
Compatible with ODROID-M1SThis is a convenient input/output port board that can be used by plugging ..
रo 263.00
Add to Cart
ODROID-H3+ has same form factor and similar power efficiency as their predecessor, the ODROID-H2+. B..
रo 18,469.00 रo 21,518.00
Add to Cart
ODROID-M1S which was developed over the past six months to respond to market demands.We made the boa..
रo 6,443.00
Add to Cart
ODROID-M1S Vu8S 8inch MIPI LCDThe four-lane MIPI-DSI port can be directly connected to a LCD panel.A..
रo 5,128.00
Add to Cart
The UPS(Uninterrupted Power Supply) Kit is designed specifically for the ODROID-M1S.It is equipped w..
रo 1,183.00
Add to Cart
The Stepper motor Controller board is designed to control up to 6 step motors and support CAN-FD bus..
रo 2,498.00
Add to Cart
Compatible with ODROID-M1SBarrel to Type-C adapter board.Input 8~17Volt, Output 5V/3AIt has a wide i..
रo 394.00
Add to Cart
4 channel relay board will provide the ability to control high voltage and high current external dev..
रo 1,315.00
Add to Cart
This board is designed to provide CAN FD (CAN with Flexible Data rate) control to ODROID single boar..
रo 1,446.00
Add to Cart
Compatible with ODROID-M1SThis is a speaker kit with on-board sound PAM8406 amplifier that can be us..
रo 1,052.00
Add to Cart
Multi I/O Training Board is designed to help one to add or extend various peripheral connections to ..
रo 1,578.00
Add to Cart
Weather Board Zero±2% (20-80%RH) Digital humidity and temperature sensor boardVery small and vertica..
रo 263.00
Add to Cart
After the commercial success of the NetCard 2.5 GbE for the ODROID-H series, we looked into how we c..
रo 1,315.00
Add to Cart
RTC Battery for Raspberry Pi 5, Options For 25mAh / 64mAh / 180mAh Battery Capacity, 2PIN JST connec..
रo 123.00
Add to Cart
Tags: RTC , Shield , Odroid C2 , Battery