AA-35 ZOOM

•  Tuning the system is easy Portable analyzer with factory calibration is designed for checking and tuning HF systems up to 35 MHz.Explore every graph detail on a large screen with ZOOM function

Main Features

• Color TFT display
• 6×3 keys on the waterproof keypad
• Factory calibrated
• Consistency and accuracy without prior recalibration
• Built-in Helper at the push of a button

Specifications:

• Frequency range: 0.06 to 35 MHz
• Frequency entry: 1 kHz
• Measurement for systems: 25, 50, 75, 100 Ohm
• SWR measurement range: 1 to 10 in chart modes
•                                                1 to 100 in numerical modes
• R and X range: 0…1000, -1000…1000 in chart modes
•                            0…10000, -10000…10000 in numerical modes
• Display modes: R, X chart, 100 points
•                             SWR chart, 100 points
• RF output: Connector type: UHF (SO-239)
•                    Output power: +13 dBm (at 50 Ohm load)
•                    Output signal shape: square
• Power: Max. 4 hours of continuous measurement, max. 2 days in standby mode when fully charged batteries are used
•              Two 1.2V Ni-MH batteries, type AA
•               When the analyzer is connected to a PC or a DC adapter with USB socket, it takes power from these sources
• Interface: 320×240 color TFT display
•                  6x3 keys on the water-proof keypad
•                  USB connection to a personal computer
• Dimensions: 103 mm x 207 mm x 37 mm (4.1 in x 8.1 in x 1.4 in)
• Operating temperature: 0…40 °C (32…104 °F)

Turn complex analysis into fun

• Rapid check-out of an antenna
• Tuning an antenna to resonance
• Comparing characteristics of an antenna before and after specific event (rain, hurricane, etc.)
• Making coaxial stubs or measuring their parameters
• Cable testing and fault location, measuring cable loss and characteristic impedance
• Measuring capacitance or inductance of reactive loads

• Rapid check-out of an antenna
• Tuning an antenna to resonance
• Comparing characteristics of an antenna before and after specific event (rain, hurricane, etc.)
• Making coaxial stubs or measuring Parameters
• Measuring capacitance or inductance of reactive loads

Documentations:

• AA-35 ZOOM antenna and cable analyzer Datasheet
• AA-35 ZOOM antenna and cable analyzer Manual ENG
• AA-35 ZOOM antenna and cable analyzer Manual DE
• AntScope2 Software for Linux
• AntScope2 Software for macOS
• AntScope2 Software for Windows
• Flashtool Firmware for macOS
• Flashtool Firmware for Windows

Package Includes:

• Alkaline batteries
• 1 x Soft case
• 1 x USB cable
• 1 x User’s manual