Sensor Hub:

Have everything you need for a comprehensive end device in one place. No need to hustle around, the choice is made easy. Connect all the sensors you need to just one device.

• The RAK2560 WisNode Sensor Hub is a modular sensor ecosystem consisting of the Sensor Hub Smart Datalogger and multiple pre-configured sensor probes. With pluggable, interchangeable probes, and the option to add third-party sensors to the mixture, the Sensor Hub is a suitable and versatile solution platform for various IoT applications where environmental monitoring is needed.
• The Sensor Hub consists of a robust waterproof enclosure with 2 sensor probe ports to connect the sensors or an external power source like a solar panel.
• Depending on the deployment location, the device can work in full battery mode or with an external power supply.
• Sensor Hub and its sensor probes are easily configured via the WisToolBox app, which is available for mobile and desktop.

Features:

• Full LoRaWAN band support
• Based on RAK4630(MCU: nRF52840, Radio Chip: SX1262)
• RUI3-based firmware
• Auto-detection of the power source
• Auto-detection of the Sensor Probes
• 2~4 pcs 3.6 V ER18505 4000mAh Li-SOCl2 Non rechargeable batteries (not included)
• 12 V DC power supply or solar panel
• NB-IoT interface module (RAK5860) support (optional)
• Embedded antenna
• High-efficiency LoRa antenna 860~930 MHz
• NFC tag for power on and smart connect over BLE
• Prevent theft via the hall effect sensor on the exclusive mounting bracket
• IP66-rated waterproof enclosure
• Multiple Sensor Probes or Probe IO can be connected to a single Sensor Hub port with the Splitter cable
• Distance between the sensors can be adjusted with the extension cable

Sensor Probe:

• The Sensor Probe is an accessory for the Sensor Hub solution platform. It supports up to 2 preselected WisBlock sensors in various combinations to provide the needed data.

NOTE: The Sensor Probe could not be used as a standalone product. You need the RAK2560 Sensor Hub in order to use this probe.

Features:

• Auto-identification of the sensor type
• One-wire protocol
• Waterproof (IP67-rated for the probe body)
• Supports up to 2 preselected WisBlock sensor modules
• More information can be found on the Sensor Probe page.

Sensor ProbeIO:

• The Probe IO is an accessory for the Sensor Hub solution platform. It supports modules with various communication protocols like RS-485, SDI-12, 4-20 mA signal, and DI/DO. This accessory can work with RAKwireless modules as well as third-party ones to ensure the best solution for your project.

NOTE: The Probe IO could not be used as a standalone product. You need the RAK2560 Sensor Hub in order to use this probe.

Features:

• Support one RS-485 device
• Support one SDI-12 device
• Support one 4-20 mA device
• Support two DO (dry contact)
• Support one DI
• Supply 5V / VIN / 24V (1A) power.
• One-wire protocol
• Waterproof (IP67-rated for the probe body)
• More information can be found on the Sensor Probe IO page.

Documentation:

• RAK2560

Package Includes:

• 1 x Sensor Hub With Sensor Probe-Temp & Humi Sensor-RAK1901 

                                            (OR)

• 1 x Sensor Hub With Sensor  Probe-Pressure Sensor -RAK1902

                                            (OR)

• 1 x Sensor Hub With Sensor Probe-3-Axis Sensor-RAK1904

                                            (OR)

• 1 x Sensor Hub With Sensor Probe-Temp & Humi and Pressure Sensor-RAK1901 and RAK1902

                                            (OR)

• 1 x Sensor Hub With Sensor Probe-Temp & Humi and 3-Axis Sensor-RAK1901 and RAK1904

                                            (OR)

• 1 x Sensor Hub With Sensor Probe-Pressure and 3-Axis Sensor-RAK1902 and RAK1904

                                            (OR)

• 1 x Sensor Hub With Sensor ProbeIO-Wind Speed & Direction Sensor-RK 900-09

                                             (OR)

• 1 x Sensor Hub With Sensor ProbeIO-Soil Moisture Temperature Conductivity Sensor-RK520-02

                                             (OR)

• 1 x Sensor Hub With Sensor ProbeIO-pH- Sensor-JXBS-3001-PH-RS

                                             (OR)

• 1 x Sensor Hub With Sensor ProbeIO-Water Level Sensor-ULB16

                                             (OR)

• 1 x Sensor Hub With Sensor ProbeIO-Pyranometer Sensor -RK200-03