This is a surge protective device for securing transceivers against over-voltage and surge current induced by bolts of lightning.
For the purpose of protecting the indoor equipment and circuitry connected to the LoRa gateway, you need to install an Ethernet Port Surge Protection Device (SPD).
RAK wireless recommends installing a lightning arrestor on all N-type antenna terminals including LoRa, LTE, and 2.4 G Wi-Fi antennas. Please refer to the technical manual for wire type and gauge recommendations.
Features:
- Connector Type: N-type male to N-type female
- Impedance: 50 Ω
- Frequency range: 0-2700 MHz
- Power loss 0-2000 MHz: ≤ 0.2 dB
- Ingress protection: IP67
- Nominal discharge current In: 10 kA
- Maximum discharge current Imax: 20 kA
- Voltage protection Level Up: ≤ 1200 V
Specifications:
- Product Weight: Approximately 180 g
- Product Dimension: 68 mm x 21 mm
Documents:
Package Includes:
- 1 x Lightning Arrestor
Lightning Arrestor
- Brand: Rakwireless
- Product Code:RAK-Lightning-Arrestor
- Reward Points:48
- Availability:In Stock
-
रo 4,761.00
- Price in reward points:4761
-
- 3 or more रo 4,723.00
- 6 or more रo 4,685.00
- 15 or more रo 4,647.00
- 30 or more रo 4,609.00
Related Products
IPEX to SMA Female Connector Cable
This gold-plated IPEX to SMA female connector has passed 48 hours salt spray test, which is durable ..
रo 406.00 रo 468.00
Adafruit 851 SMA to uFL/u.FL/IPX/IPEX RF Adapter Cable
This RF adapter cable is super handy for anyone doing RF work. Often times, small electronics save s..
रo 426.00
Lightning Arrestor for 10 AWG Grounding Wire - 1 meter
RAKwireless recommends a lightning arrestor to be installed on all the N-Type antenna terminals (LoR..
रo 744.00
