The G01 is the GPy OEM module. It’s just like the GPy except it’s been whittled down a little to make it easy to integrate. Triple network module: Cellular LTE-CAT M1/NB1, WiFi and Bluetooth.
Features:
- Powerful CPU
- 1KM Wifi Range
- MicroPython enabled
- Fits on the Pycom OEM Reference Board.
- Ultra-low power usage: a fraction compared to other connected micro controllers
Cellular Operating Frequencies:
- 34 bands supported from 699Mhz to 2690Mhz (Total world-wide support)
- Bands supported are currently: 1, 2, 3, 4, 5, 8, 12, 13, 14, 17, 18, 19, 20, 25, 26, 28, 66
Cellular Specification:
- One single chip for both CAT M1 and NB1 (yes, only one chip)
- 3GPP release 13 LTE Advanced Pro
- Supports narrowband LTE UE categories M1/NB1
- Integrated baseband, RF, RAM memory and power management
- Reduced Tx power class option
- Peak power estimations: TX current = 420mA peak @1.5Watt RX current = 330mA peak @1.2Watt
-
Data rates:
- 300 kbps DL
- 375 kbps UL (LTE Cat M1 in 1.4 Mhz, HD-FDD)
- 40 kbps DL
- 55 kbps UL (LTE Cat M2 in 200 kHz, HD-FDD)
Tx/Rx Frequencies:
| Ports for LTE Bands | Tx frequencies | Rx frequencies |
| Low bands 5, 8, 12, 13, 14, 17, 18, 19, 20, 26, 28 | 699 to 915 MHz | 729 to 960 MHz |
| Mid bands 1, 2, 3, 4, 25, 66 | 1710 to 1980MHz | 1805 to 2170 MHz |
Interfaces:
- 2 x UART, 2 x SPI, I2C, I2S, micro SD card
- Analog channels: 8×12 bit ADCs, 2×8 bit DAC
- Timers: 2×64 bit with PWM with up to 16 channels
- DMA on all peripherals
Power:
- Voltage Input: 3.3V regulated
Processing:
- Espressif ESP32 SoC
- Dual processor WiFi radio System on Chip.
- Network processor handles the WiFi connectivity and the IPv6 stack
- Main processor is entirely free to run the user application
- An extra ULP-coprocessor that can monitor GPIOs, the ADC channels and control most of the internal peripherals during deep-sleep mode while only consuming 25uA
Security & Certifications:
- SSL/TLS support up to 1.2
- WPA Enterprise security
- AES encryption engine
Memory:
- RAM: 4MB
- Flash Memory: 8MB
- GPIO: Up to 22
- Hardware floating point acceleration
- Python multi-threading
- Hash / encryption
- SHA, MD5, DES, AES
WiFi Networking:
- 802.11b/g/n 16mbps
Bluetooth:
- Low energy and classic
RTC:
- Running at 32KHz.
Package Includes:
-
1 x G01 OEM Module
G01 OEM Module
- Brand: Pycom
- Product Code:Pycom-G01-OEM-Module
- Reward Points:58
- Availability:Back-order
-
रo 5,552.00
- Price in reward points:5784
-
- 2 or more रo 5,529.00
- 5 or more रo 5,506.00
- 12 or more रo 5,483.00
- 25 or more रo 5,460.00
Related Products
GPy
Note: This is to preorder for shipping May 2017 Get on with a board that gets you into the new..
रo 6,611.00
W01 OEM Module
The W01 is the WiPy OEM module. It’s going to work exactly like your WiPy but we’ve trimmed a few bi..
रo 1,571.00
OEM Reference Board
Reference Board used to mount either Pycom OEM modules. Provides the same functionality and pin-out ..
रo 2,042.00
L01 OEM Module
The L01 is the LoPy OEM module. It works just like the LoPy but we’ve trimmed a few bits to make it ..
रo 2,997.00
L04 OEM Module
The L04 is the LoPy4 OEM module. It works just like the LoPy4 but we’ve trimmed a few bits to make i..
रo 3,629.00
