The new F01 H7 is a quad LPWAN network OEM module that gives you everything you know from the FiPy and more.

Based on an ARM Cortex H7 microcontroller and MuRata Radio modules this OEM module will take your from PoC to Scale in the fastest possible way.

With LoRa, WiFi, BLE and cellular LTE–CAT M1/ NB1, the F01 H7 is Pycom’s latest and most powerful MuRata-based, MicroPython-programmable microcontroller OEM module. It’s the perfect enterprise grade IoT platform for flexible multi-network creations and rapid scaling of Things that connect to the Internet.

Features:

Powerful ARM Cortex CPU
MuRata network modules
Flagship NXP Security chip
Easily SMT mounts onto standard carrier boards, breadboards or M.2 boards
More than 60 usable pins accessed via a High Destiny Socket
Optional External Radios, RGB LEDs, Reset buttons and more
Four Networks including WiFi, BLE, Cellular LTE–CAT M1/NB1, LoRa (and Sigfox as optional addition)
World ready as one product covers all LoRa(WAN) frequencies and LTE–M bands
MicroPython programmable with Ultra–Low power usage: a fraction of other connected microcontrollers
Size 40mm x 16mm x 2.7mm (with headers)

Specifications:

Microcontroller STM32H7BQIY6QTR
32-bit ARM Cortex -M7 core STM32H7 microcontroller, up to 599 DMIPS.
Hardware floating point acceleration
Python multi–threading
2 Mbyte onboard Flash memory
4 Mbytes of onboard RAM
46 com. and analogue interfaces,
SMPS
Crypto

Encryption

Flagship NXP SE050C2HQ140nm NXP IntegralSecurity architecture
Common Criteria EAL 6+ certified up to OS level as a safe environment to run pre-installed NXP IoT applets, supporting full encrypted communications and secured lifecycle management
RSA & ECC functionalities, high key length and future proof curves
AES & 3DES encryption and decryption
HMAC, CMAC, SHA-1, SHA-224/256/384/512 operations
HKDF, MIFARE KDF, PRF (TLS-PSK)
Support of main TPM functionalities
Secured flash user memory up to 50 kB
I2C Target (High-speed mode, 3.4 Mbit/s), I2C Controller (Fast-mode, 400 kbit/s)
SCP03 (bus encryption and encrypted credential injection on applet and platform level)
Contactless interface for late-stage parameter configuration of unpowered devices
Standard (-25 to +85 °C) and extended temp range for industrial applications (-40 to +105 °C)

External Memory on fast Octo SPI interface

32 Mbytes of RAM
32 Mbytes of flash

WiFi

MuRata 1DX
11 b/g/n/e

11 n (2.4 GHz) up to 65 Mbps
Network topology: AP and STA dual mode
WLAN section supports SDIO v2.0

Supported Features

Modulation: DSSS/ CCK / ODFM

Bluetooth

MuRata 1DX
Low energy
Bluetooth v5.1 (BR/EDR/BLE) module
Data Rate: 3Mbps PHY data rate
Supports high-speed 4-wire UART interface
PCM for audio data

LoRa

MuRata 1SJ
LoRaWAN stack – Class A, B & C Devices
860-930MHz LPWA Module
Low power consumption
Node range: Up to 8km
Nano–gateway: Up to 8km
Nano Gateway Capacity: up to 100 Nodes

LTE CAT–M1/NB–IoT

MuRata 1SC specification
One single chip for both CAT M1 and NB1
LTE CAT M1 – 23 dBm
16 MB of flash
3GPP Rel. 13 eDRX and PSM modes
Power Consumption: enables up to 10 year battery life

Hibernation current: 1.5 μA (average)
eDRX current: <45 uA (avg) at 8 Hyperframes

GNSS: GPS and Glonass
VoLTE

Running at 32KHz

Security

SSL/TLS support
WPA Enterprise security

Hash / Encryption

SHA – MD5 – DES – AES

Certifications and Compliance

The F01 H7 is planned for the following compliance and certifications

RED Directive
ROHS
CE
FCC IC
RCM
PTCRB

As this is an OEM module with a certification using Pycom Antenna specifications it is likely to require further certification as it is manufactured into a finished product. Pycom can assist with the process.

Documents: