- The LoPy4 includes 2-years of Sigfox connectivity.
- Using the LoRa or Sigfox radio without the external antenna can lead to damage of the device and is therefore not recommended.
- Powerful CPU, BLE and state of the art WiFi radio
- Can also double up as Nano LoRa gateway
- MicroPython enabled
- Fits in a standard breadboard (with headers)
- Ultra-low power usage: a fraction compared to other connected micro controllers
- Espressif ESP32 chipset
- Dual processor + WiFi radio System on chip
- Network processor handles the WiFi connectivity and the IPv6 stack
- Main processor is entirely free to run the user application
- An extra ULP-coprocessor that can monitor GPIOs, the ADC channels and control most of the internal peripherals during deep-sleep mode while only consuming 25uA
- RCZ1 – 868MHz (Europe)
- RCZ2 – 902MHz (US, Canada and Mexico)
- RCZ3 – (Japan and Korea)
- RCZ4 – 920-922MHz (ANZ, Latin America and S-E Asia)
- Class 0 device. Maximum Tx power:
- +14dBm (Europe)
- +20dBm (America)
- +20dBm (Australia and New Zealand)
- Node range: Up to 50km
- Sigfox certified
- Semtech LoRa transceiver SX1276
- LoRaWAN stack
- Class A and C devices
- 868 MHz (Europe) at +14dBm maximum
- 915 MHz (North and South America, Australia and New Zealand) at +20dBm maximum
- 433 MHz (Europe) at +10dBm maximum
- 470 – 510 MHz (China) at +14dBm maximum
- Node range: Up to 40km
- Nano-gateway: Up to 22km
- Nano-gateway capacity: Up to 100 nodes
- 2 x UART, SPI, 2 x I2C, I2S, micro SD card
- Analog channels: 8×12 bit ADCs
- Timers: 4×16 bit with PWM and input capture
- DMA on all peripherals
- GPIO: Up to 24
- SSL/TLS support
- WPA Enterprise security
- FCC – 2AJMTLOPY4R
- CE 0700
- RAM: 4MB
- External flash: 8MB
- Hardware floating point acceleration
- Python multi-threading
- SHA, MD5, DES, AES
- 802.1b/g/n 16mbps
- Low energy and classic
- Running at 32KHz
- Input: 3.3V – 5.5V
- 3v3 output capable of sourcing up to 400mA
- WiFi: 12mA in active mode, 5uA in standby
- LoRa: 15mA in active mode, 1-uA in standby
- Sigfox (Europe): 12mA in Rx mode, 42mA in Tx mode and 0.5uA in standby
- Sigfox (Australia, New Zealand and South America): 12mA in Rx mode, 120 mA in Tx mode and 0.5uA in standby
- 55mm x 20mm x 3.5mm (Without Headers)
- 7g
- 31g (Packaged)
- 1 x LoPy4
LoPy4
- Brand: Pycom
- Product Code:Pycom-LoPy4
- Reward Points:55
- Availability:Out Of Stock
-
रo 5,252.00
- Price in reward points:5470
-
- 3 or more रo 5,230.00
- 5 or more रo 5,208.00
- 13 or more रo 5,186.00
- 25 or more रo 5,164.00
Available Options
Related Products
WiPy 2.0
Introducing the WiPy 2.0. The tiny Micro Python enabled WiFi & Bluetooth IoT development platfor..
रo 3,010.00
SiPy
The SiPy is a multi-network (Sigfox, WiFi and BLE) development platform. It is programmable with Mic..
रo 3,385.00 रo 4,641.00
FiPy - IoT development board
Imagine 5 networks in one perfectly-formed, same-small-foot-print-as-WiPy- LoPy-and SiPy, IoT develo..
रo 6,972.00
GPy
Note: This is to preorder for shipping May 2017 Get on with a board that gets you into the new..
रo 6,611.00
Pygate
Pygate is Pycom’s latest hardware tech portfolio addition. This is a new super low-cost 8-channe..
रo 7,507.00
L01 OEM Module
The L01 is the LoPy OEM module. It works just like the LoPy but we’ve trimmed a few bits to make it ..
रo 2,997.00
L04 OEM Module
The L04 is the LoPy4 OEM module. It works just like the LoPy4 but we’ve trimmed a few bits to make i..
रo 3,629.00
Expansion Board 3.0 / 3.1
The Expansion Board 3.0 is compatible with the WiPy 3.0, LoPy4, SiPy, FiPy and GPy. Featur..
रo 2,403.00
Pysense 2.0 X
Pysense 2.0 X is a 2nd Generation sensor shield which can be used with any Pycom multi-network modul..
रo 4,051.00
LoRa (868MHz/915MHz) and Sigfox Antenna Kit
This universal LoRa & Sigfox Antenna Kit can be used with the LoPy, SiPy, LoPy4 and FiPy IoT Dev..
रo 1,230.00
Pygate Case
Pygate is Pycom’s new super low-cost 8-channel LoRaWAN gateway that comes in the shape of a shield a..
रo 1,359.00
