This gearmotor is a miniature high-power, 12 V brushed DC motor with long-life carbon brushes and a 379.17:1 metal gearbox. This version has stainless steel gearbox plates instead of the standard brass ones for increased durability and resistance to wear from radial loads. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. This version also has a 4.5 × 1 mm extended motor shaft.

These tiny brushed DC gearmotors are available in a wide range of gear ratios—from 5:1 up to 1000:1—and with five different motors: high-power 6 V and 12 V motors with long-life carbon brushes (HPCB), and high-power (HP), medium power (MP), and low power (LP) 6 V motors with shorter-life precious metal brushes. The 6 V and 12 V HPCB motors offer the same performance at their respective nominal voltages, just with the 12 V motor drawing half the current of the 6 V motor. The 6 V HPCB and 6 V HP motors are identical except for their brushes, which only affect the lifetime of the motor.

Specifications:

Gear ratio	379.17:1
No-load speed @ 6V	84 rpm
No-load current @ 6V	0.07 A
Stall current @ 6V	1.6 A
Stall torque @ 6V	5.5 kg·cm
Max output power @ 6V	1.1 W
Motor type	1.6A stall @ 6V (HP 6V)

Documents:

Package Includes:

1 x Pololu 4794 / 4795 380:1 Micro Metal Gearmotor HP 6V

Motor Specifications
Type	HP Micro Metal Gearmotor
Speed (RPM)	84 rpm
Torque	5.5 kg·cm
Gear Ratio	379.17:1
Shaft Diameter	3mm
Electrical Specifications
Maximum Operating Voltage	6V
Minimum Operating Current	1.6 A
Physical Attributes
Weight	9.5g
Dimensions	10 × 12 × 26 mm
Additional Information
Warranty