The FT90R is a micro-sized digital servo that has been built by FEETECH (formerly known as Fitec) specifically for continuous rotation. At 6 V, it has a maximum rotation speed of around 135 RPM (no-load) and can produce up to 21 oz-in (1.5 kg-cm) of torque. The servo can be controlled using a direct connection to a single microcontroller I/O line without any additional electronics, which makes it a great miniature actuator for beginner robotics projects; just throw on a pair of wheels and your robot is ready to roll!

The FT90R continuous rotation servo converts standard RC servo position pulses into continuous rotation speed. The rest point (sometimes called neutral position) is set to 1.5 ms. Pulse widths above the rest point result in counterclockwise rotation, with speed increasing as the pulse width increases; pulse widths below the rest point result in clockwise rotation, with speed increasing as the pulse width decreases.

The servo has a 10″ (250 mm) lead that is terminated with a JR-style connector and includes additional servo horns and mounting hardware.

Specifications:

• Digital?: Y
• No-load current @ 6V: 120 mA
• Stall current @ 6V: 800 mA
• Speed @ 6V: 135 rpm
• Stall torque @ 6V: 21 oz·in
• Speed @ 4.8V: 108 rpm
• Stall torque @ 4.8V: 18 oz·in
• Hardware included?: Y
• Lead length: 10 in

Documents:

• Datasheet

Warranty:

• Warranty will not apply if Product fails or is damaged after delivery to you due to accident, abuse or misuse.

Package Includes:

• 1 x Pololu 2817 FEETECH FT90R Digital Micro Continuous Rotation Servo