Add-on sensor board for ODROID-SHOW

The Weather board is an easy to use ODROID-SHOW Add-on that grants you access to

UV Index,
Barometric pressure,
Altitude,
Relative humidity,
Illumination,
Temperature.

Features

Dimension is only 20 x 20 mm
Sensors : Si7020, BMP180, Si1132
Recommended working voltage : 2.7 ~ 3.6 Volt

Board Detail

With a few batteries, you can make a portable outdoor weather data capture system. You can also connect it to your host PC or ODROID via ODROID-SHOW to log the various environmental data like a weather station.

Each sensor is shown in this picture

Hardware setup

Put your weather board on the ODROID-SHOW and connect a micro-USB cable to your host PC or other ODROID Linux boards. If the connection is established, you can find /dev/ttyUSB0 or similar one.

Connect 3~4 Alkaline or NiMH/NiCD batteries if you need a portable device.

Firmware setup

Download the sketch file and libraries from this link.

https://github.com/hardkernel/ODROID-SHOW/

Check the place of weather_board.ino sketch file.

ODROID-SHOW/firmware/weather_board/weather_board.ino

Select “preference” in the File menu and choose “ODROID-SHOW” of sketch folder.

To add proper libraries, Select Import library -> Add library and “ODROID-SHOW/libraries.

It’s time to build and upload the sketch file. The jumper(nearby reset button) must be installed.

You will see this screen which shows various weather data.

Note:

The supplier of the product has no replacement and/or refund policy as part of their product warranty/guarantee. Furthermore, the repair cost and the cost of shipping to and fro from South Korea has to be borne. As Fab.to.Lab is merely an intermediary we extend the exact same warranty terms to all customers of Harkernel.

Please find more details here: Supplier warranty terms and conditions: https://www.hardkernel.com/agreement/

WiKi