For those who appreciate the beauty of the naked PCB board – but still wants to protect the ODROID-C2/ C1+ from dust and the elements. The semi-transparent case has openings for all outputs including the GPIO port making it a great fit projects that are connected to external hardware.

The cover of GPIO part can be easily removed by simple cutting of a few ribs.

Features:

Strong & Durable Poly Carbonate Plastic
Size : 90 x 59 x 28 mm
Weight : 32g

The drawings of the plastic case is supplied in AutoCAD format.

The plastic case has not enough hole/slot to make a good air-flow and it is one of the main root causes of over-heating. We recommend you to use a heatsink when you put the board in the case.

Normal Use Use the GPIO Headers

There are openings for Ethernet, 4 x USB Host, microUSB, HDMI and DC Jack.

The cover over GPIO pins can be easily removed by cutting of a few ribs and will give you easy access to the GPIO port. If you are using the USB-UART Module kit, the cable can also be routed through this opening.

Fit the ODROID-C1+ in the case using the locking tabs and secure it using two included screws through the screw holes on the bottom side. A spare screw is included in the package. You will need a small screwdriver.

This case has more vent holes on the bottom side and has a slot for your MicroSD card.

Note:

The supplier of the product has no replacement and/or refund policy as part of their product warranty/guarantee. Furthermore, the repair cost and the cost of shipping to and fro from South Korea has to be borne. As Fab.to.Lab is merely an intermediary we extend the exact same warranty terms to all customers of Harkernel.

Please find more details here: Supplier warranty terms and conditions: https://www.hardkernel.com/agreement/