The BT-100 is a wideband bias tee TX Power Amplifier (PA) that draws its current from the bladeRF 2.0 micro’s SMA connectors. The BT-100 is versatile PA that is an ideal intermediary or final stage amplifier in a TX chain. bladeRF-cli and the libbladeRF API can be used to enable and disable the bias-tee when it is needed. Care should be taken to avoid overdrawing current when powering the bladeRF 2.0 micro from USB bus power and enabling multiple bias-tee amplifiers simultaneously. In case the power budget (print hardware in bladeRF-cli) is a concern, the bladeRF 2.0 micro can be powered by an external DC power supply.
The BT-100 is backwards compatible with the bladeRF 1.0 and other transceivers. However J3 must be populated and +5V must be supplied to the board through a separate connector.
NOTE: The BT-100 can only be plugged into the TX ports.
Kit includes:
1x BT-100 Bias-tee Power Amplified
Documentation:
Compatible with:
bladeRF xA4 & bladeRF xA9
Micro Enclosure
Key features:
Features Mini-Circuits PHA-1H+ MMIC Amplifier – 50MHz to 6GHz MMIC
Power consumption: 200mW
Blue LED power indicator
Gain: +15.7db @ 200MHz, +11dB @ 2.4GHz
Noise figure: +1.6dB @ 200MHz, 3.1 @ 2.4GHz
Minimum output IP3 of +38dBm
bladeRF-cli command:
Enable module: set biastee tx on
Disable module: set biastee tx off
Query system power consumption: print hardware
Additional information:
Weight 0.2 lbs
Dimensions 1.5 x 1 x .5 in
BT-100 Bias-tee Power Amplifier
- Brand: Nuand
- Product Code:Nuand-BT-100
- Reward Points:39
- Availability:In Stock
-
रo 3,872.00
- Price in reward points:3872
-
- 4 or more रo 3,841.00
- 7 or more रo 3,810.00
- 20 or more रo 3,779.00
- 35 or more रo 3,748.00
Related Products
BT-200 Bias-tee Low Noise Amplifier
The BT-200 is a wideband bias-tee RX Low Noise Amplifier that draws its current from the bladeRF 2.0..
रo 3,872.00
bladeRF 2.0 micro xA9
bladeRF 2.0 micro xA9, 47MHz to 6GHz frequency range, 61.44MHz sampling rate, 2×2 MIMO channels USB ..
रo 108,321.00
