Highlights:
- Full-duplex 40MSPS 12bit quadrature sampling
- Factory calibrated VCTCXO tuned within 1 Hz of 38.4 MHz
- Removable-cap RF shields for increased system sensitivity and isolation
- Flexible clocking architecture for arbitrary sample rates
- GPIO expansion port ( GPIO Expansion Board )
- SPI flash allows for headless operation
- Expanded frequency coverage using XB-200 Transverter Board
- Typical +6dBm TX power
Technical Specifications:
- Fully bus-powered USB 3.0 SuperSpeed Software Defined Radio
- Portable, handheld form factor: 5" by 3.5"
- Gold plated RF SMA connectors
- 300MHz - 3.8GHz RF frequency range
- Independent RX/TX 12-bit 40MSPS quadrature sampling
- Flexible clocking architecture
- Capable of achieving full-duplex 28MHz channels
- 16-bit DAC factory calibrated 38.4MHz +/-1ppm VCTCXO
- On-board 200MHz ARM9 with 512KB embedded SRAM (JTAG port available)
- On-board 40KLE Altera Cyclone 4 E FPGA (JTAG port available)
- 2x2 MIMO configurable with SMB cable, expandable up to 4x4
- Modular expansion board design for adding GPIO and expanding frequency range,
- DC power jack for running headless
- Highly efficient, low noise power architecture
- Stable Linux, Windows, Mac and GNURadio software support

High speed, low latency and increased power delivery over a single cable: USB 3.0 Superspeed is the perfect interface for a wide bandwidth radio front end to modern computers. The Cypress FX3 microcontroller is the ideal solution with a powerful ARM9 processor and enough bandwidth to saturate the full duplex 5Gbps USB 3.0 link.
An Altera Cyclone IV FPGA provides the interface between the FX3 and RF transceiver. This FPGA has single-cycle access embedded memory, hard 18x18 multipliers for dedicated DSP and many general logic elements ready to be programmed.


From bits to RF, the LimeMicro LMS6002D is a fully integrated RF transceiver. Made to power picocell stations, this transceiver is capable of handling anything from simple FM audio to the latest 4G LTE standard to whatever the future may hold.
Professional Quality
The bladeRF's design has been tested and verify to meet our very high standards. At peak RF performance, the bladeRF can occupy 28MHz of bandwidth over its operating bandwidth without any significant spurs.
Documents:
Package Includes:
- bladeRF x40 (40KLE Cyclone 4 FPGA)
- USB 3.0 SS cable
- 2x SMA cables
SDR Specifications | |
Tuning range | 300MHz to 3.8GHz |
Duplex | Full-duplex |
Max sampling rate | 40MSPS |
ADC/DAC resolution | 12bit quadrature sampling |
Max RF bandwidth | 28MHz |
bladeRF X40
- Brand: Nuand
- Product Code:Nuand-bladeRF-x40
- Reward Points:660
- Availability:In Stock
-
रo 66,033.00
- Price in reward points:66033
-
- 2 or more रo 65,496.00
Related Products
Ham It Up v1.3 Barebones - HF Upconverter
Now shipping v1.3! We believe this is the best SDR upconverter available. Here is why.Major ve..
रo 5,999.00
RF Connect Wireless Radio Boards AXE213
The AXE213 is a pair of boards which allow simple PICAXE to PICAXE (or PICAXE to PC) interfacing usi..
रo 1,385.00
bladeRF x115
Kit includes: bladeRF x115 (115KLE Cyclone 4 FPGA) USB 3.0 SS cable 2x SMA..
रo 98,244.00
bladeRF x115 Thermal (-40C to 85C)
Kit includes: bladeRF x115 (115KLE Cyclone 4 FPGA) USB 3.0 SS cable 2x SM..
रo 232,966.00
Transverter LF/MF/HF/VHF
The XB-200 is a block up-down converter that greatly expands the bladeRF’s lower frequency range. Th..
रo 31,747.00
Amplifier bladeRF - XB-300
The XB-300 is an amplifier expansion card that greatly expands the bladeRF’s RF performance. The amp..
रo 19,075.00
bladeRF case
Description: The case fits bladeRFs with Type A and Type B connectors. The bladeRF case feat..
रo 2,581.00
BladeRF Expansion Board Case
The case fits bladeRFs with Type A and Type B connectors. The case perfectly fits the XB-200 and XB-..
रo 2,839.00
Antenna - Software Defined Radio
ChipDesign's tunable antenna for mobile devices consists of a low-profile electronically-tunable ele..
रo 4,432.00
Adafruit 945/944 2.4GHz Dipole Swivel Antenna with RP-SMA - 2dBi / 5dBi
This is 4"/100mm long swivel dipole antenna for 2dBi of gain and 50Ω impedance and 8"/200mm long swi..
रo 966.00
Antenna 700~5800 MHz
Designed to cover all cellular, ISM and Wi-Fi working frequencies. 698-960 MHz, 1575.42 MHz, 1710-27..
रo 6,555.00
SDR 1 MHz to 6 GHz - HackRf One
SDR-1 MHz to 6 GHz 1 MHz to 6 GHz operating frequency half-duplex transceiver ..
रo 21,785.00
Hak5 Elite Field Kit
This exclusive Field Kit combines the most popular Hak5 signature gear, all compiled in our Elite Eq..
रo 87,125.00
Ultra-WideBand Vivaldi Antenna 800MHz to 6GHz+
This is an Ultra-wideband Vivaldi antenna. This antenna provides good gain from about 1.7GHz through..
रo 2,585.00
PandwaRF with various options
PandwaRF is a pocket-sized, portable RF analysis tool operating the sub-1 GHz range. It allows t..
रo 16,861.00
bladeRF 2.0 micro xA4
bladeRF 2.0 micro xA4, 47MHz to 6GHz frequency range, 61.44MHz sampling rate, 2×2 MIMO channels USB ..
रo 68,015.00
bladeRF 2.0 micro xA9
bladeRF 2.0 micro xA9, 47MHz to 6GHz frequency range, 61.44MHz sampling rate, 2×2 MIMO channels USB ..
रo 108,321.00
Tags: Bladerf x40 USB 3.0 GNU Radio 300MHz to 3.8GHz GPIO 1 Hz of 38.4 MHzRF 40MSPS 12bit quadrature sampling Windows Linux Mac