A highly-portable RF (LF/MF/HF) converter for software defined radio devices like our NESDR series (RTL-SDR) and the HackRF. Wide frequency capability of 100kHz-65MHz, 1PPM accuracy, and bias-tee powerable!
The Ham It Up Nano is installed in a heavy-duty black aluminum enclosure and includes a male SMA to male SMA barrel connector and a microUSB to DC barrel connector adapter.
Ham It Up Nano will also work as a panadapter for most radios and can be used for both receiving and transmitting.
The Ham It Up Nano is an HF upconverter that will allow you to extend the range of your favorite SDR or radio down to at least 100kHz. It is compatible with any radio capable of 125MHz-190MHz operation (to utilize the entirety of its 100kHz-65MHz frequency range). It is factory installed in a heavy-duty black aluminum enclosure and includes a male SMA to male SMA barrel connector and microUSB to DC barrel connector adapter.
Major features :
Small, light-weight module--just 2.0" x 1.2" x 0.75" (50 x 30 x 18mm) and 1.6oz (45g)!
3 different powering options: bias-tee, microUSB and DC barrel connector
Contains an internal 125MHz low-phase-noise TCXO w/ 1PPM accuracy for improved sensitivity (away from high-traffic RF zones, like broadcast FM)
Double shielded from external RF interference (EMI) with the external aluminum enclosure and an additional internal EMI shield
A maximum input level of +1dBm
Contains 3 filters--input, output and LO filters--configured with ultra-high quality components for excellent sensitivity and selectivity
ESD protection on both the RF input and output to protect your Ham It Up & SDR from stray static discharge
Reverse voltage protection and short circuit protection on the USB power input to protect your Ham It Up from accidental damage
Ultra low-noise linear power regulator with voltage noise under 10 µVRMS!
Side-mount LED power indicator
Sturdy right-angle 50 ohm SMA connectors used for both input and output
High-quality PCB with ENIG finish
Operation :
- Connect your HF-capable antenna to the RF input
- Connect your SDR or radio to the IF output
- Power the Ham It Up Nano through bias tee, microUSB or the DC connector (center positive, 4-5.5V DC)
- Fire up your favorite SDR software. Tune to 125MHz + your desired frequency (or set the software frequency offset to 125MHz and tune directly) and enjoy!
Package Includes :
1 X Ham It Up Nano - Tiny HF Upconverter w/ Black Enclosure, TCXO, & Bias-Tee Power Support
Ham It Up Nano - Tiny HF Upconverter with Black Enclosure, TCXO and Bias-Tee Power Support
- Brand: Nooelec
- Product Code:NE-Ham-It-Up-Nano
- Reward Points:69
- Availability:In Stock
-
रo 6,950.00
- Price in reward points:6950
-
- 2 or more रo 6,890.00
- 4 or more रo 6,835.00
- 10 or more रo 6,780.00
- 20 or more रo 6,725.00
Related Products
NooElec NESDR Mini 2+0.5PPM TCXO USB RTL-SDR Receiver (RTL2832 + R820T2) with Antenna
This custom Nooelec SDR is a modified DVB-T USB dongle tuned for SDR usage, including a high-accurac..
रo 4,545.00
Ham It Up Plus Barebones - HF Upconverter with TCXO, ULF Support and Noise Source
The Ham It Up Plus Barebones is an HF upconverter that will allow you to extend the range of your fa..
रo 6,950.00
Nooelec Ham It Down 3GHz Downconverter - Extends The Frequency of Your RTL-SDR
Experience enhanced performance and versatility with the Ham It Down 3GHz Downconverter. Designed to..
रo 11,283.00
Ham It Up Plus v2 - Extend the Range of Your RTL-SDR, NESDR
Get ready to revolutionize your radio experience with the Ham It Up Plus v2--an addon for your RTL-S..
रo 8,845.00
Tags: Ham It Up Nano, Tiny HF, Upconverter, TCXO, BiasTee
