Features of the weather resistant MB7040, I2CXL-MaxSonar-WR, include centimeter resolution, short to long distance detection, range information from 20cm to 765cm for the nearest detectable target, up to a 40Hz read rate, and an I2C interface.
The MB7040 from the I2CXL-MaxSonar-WR line of outdoor sensors is a rugged ultrasonic sensor component module. This sensor comes in a compact and robust PVC housing which meets the IP67 water intrusion standard and matches standard electrical 3/4‑inch PVC pipe fittings (this product has multiple housing options available).
The I2CXL-MaxSonar-WR sensors are factory calibrated to match narrow sensor beam patterns and provide reliable long-range detection zones.
In addition, the MB7040 offers virtually noise free distance readings through the use of high-output acoustic power combined with continuously variable gain, real‑time background automatic calibration, real‑time waveform signature analysis, and noise rejection algorithms. This holds true even in the presence of many of the various acoustic or electrical noise sources.
Specifications :
- Resolution of 1 cm
- Up to 40Hz reading rate
- Simple I2C bus interface
- Easy control of multiple sensors
- Control up to 127 sensors using two wires
- 42kHz Ultrasonic sensor measures distance to objects
- RoHS Compliant
- I2C Bus interface
- Operates from 3.0-5.5V
- Low 3.4mA average current requirement
- Small, light weight module
- Designed for easy integration into your project or product
- Operational Temperature from -40˚C to +70˚C (-40˚F to +160˚F)
- Real-time automatic calibration (voltage, humidity, ambient noise)
- Firmware filtering for better noise tolerance and clutter rejection
- 200,000+ Hours Mean Time Between Failure
- Weather Resistant (IP67), optional Chemical Resistant F-Option
- Available in multiple mounting packages – 3/4″ NPS, Ultra-Compact, 1″ NPS, 1″ BSPP, 30mm1.5
- IP67 rated, I2C interface ultrasonic sensor
- Maximum range of 765 cm (300 inches)
- Long-range, narrow detection zone
Documents :
Using an I2C-MaxSonar With an Arduino
RoHS Declaration of Conformity
Models with additional chemical resistance are available :
The F-Option (IP68) design modification provides our weather resistant sensors with extra protection against corrosive chemical environments. Ask for the F-Option (IP68) when ordering.
The MaxBotix F-Option (IP68) provides additional protection necessary in a few hazardous chemical environments. Extremely corrosive gases or liquids can degrade or compromise the operation of the sensing unit. As a result, we offer a more chemically inert seal which allows our sensors to operate in all but the harshest of chemical environments. In addition to the chemical resistance, the sensor has improved performance in wet or dust environments.
Please Note: Our sensors are designed for operation in normal atmosphere (air). Please be aware that the speed of sound and atmospheric attenuation may change as a result of the transmission properties of different chemical/air mediums. Users are strongly encouraged to characterize and test the operation of the sensor in the new medium to verify operation, and properly scale the outputted range information.
F-Option
The exposed materials of a properly mounted MaxSonar‑WR sensor with the F-Option (IP68) added are: Aluminum (oxidized surface), PVC, & Fluorosilicone (with an additional back up FEP Teflon® seal).
Standard Weather Resistant Models
The exposed materials of a properly mounted MaxSonar‑WR standard sensor are: Aluminum (oxidized surface), PVC, & silicone rubber (VMQ).
Compatibility
The F‑Option is compatible with the following sensor lines:
- 4-20HR‑MaxSonar‑WR
- 4-20SC‑MaxSonar‑WR
- HRXL‑MaxSonar‑WR
- HRXL‑MaxSonar‑WRS
- SCXL‑MaxSonar‑WR
- SCXL‑MaxSonar‑WRS
- I2CXL‑MaxSonar‑WR
- XL‑MaxSonar‑WR
- Component Overview
- RoHS Compliant
- Fluorosilicone Sealant (with an additional back up FEP Teflon® seal)
P-Option :
Provides a Parylene coating as a barrier to help prevent corrosion of the aluminum transducer.
Shielded Cable Attach :
Comes with 3ft of cable.
Part Numbers :
All part numbers are a combination of a six-character base followed by a dash and a three-digit product code. Please review the following table for more information on the three-digit product code.
Base :
M B 7 0 4 0 |
Three-digit product code :
CELL 1 | CELL 2 | CELL 3 |
Example :
1 | 0 | 0 |
CELL 1:
Housing Style :
0 | Not Applicable |
1 | 3/4" NPS WR |
2 | 3/4" NPS WRC |
3 | Ultra Compact |
4 | Ultra Compact Flush Mount |
5 | 1" NPS |
6 | 1" BSPP |
7 | 30MM 1.5 |
8 | Extended Horn |
CELL 2 :
Options Selected :
0 | No Options(Bagged) |
1 | F-Option |
2 | P-Option |
3 | F-Option and P-Option |
4 | No Options(Trayed) |
5 | TTL(Bagged) |
6 | TTL(Trayed) |
CELL 3 :
Wire Attach :
0 | No Wire Attach |
1 | Wire Attached |
The following table displays all of the active and valid part numbers for this product.
Active Part Numbers :
MB7040-100 MB7040-101 MB7040-110 MB7040-111
MB7040-120 MB7040-121 MB7040-130 MB7040-131
MB7040-200 MB7040-201 MB7040-210 MB7040-211
MB7040-220 MB7040-221 MB7040-230 MB7040-231
MB7040-300 MB7040-320 MB7040-400 MB7040-420
MB7040-500 MB7040-501 MB7040-510 MB7040-511
MB7040-520 MB7040-521 MB7040-530 MB7040-531
MB7040-600 MB7040-601 MB7040-610 MB7040-611
MB7040-620 MB7040-621 MB7040-630 MB7040-631
MB7040-700 MB7040-701 MB7040-710 MB7040-711
MB7040-720 MB7040-721 MB7040-730 MB7040-731
Package Includes :
1 x Maxbotix MB7040-XXX I2CXL-MaxSonar-WR - High Performance Ultrasonic Precision Rangefinder
Maxbotix MB7040 I2CXL-MaxSonar-WR - High Performance Ultrasonic Precision Rangefinder
- Brand: Maxbotix
- Product Code:Maxbotix-MB7040-I2CXL-MaxSonar
- Reward Points:149
- Availability:In Stock
-
रo 14,752.00
- Price in reward points:14871
-
- 2 or more रo 14,633.00
- 5 or more रo 14,514.00
- 10 or more रo 14,395.00
Available Options
Related Products
Tags: Sonar