M5StickT2 is an exquisite and compact infrared thermal imaging camera. It adopts the latest FLIR Lepton 3.0 long-wave infrared (LWIR) camera core with an effective resolution of 160 x 120 for a clear and stable image. As it is a large area non-contact infrared sensor, it is a good solution for temperature measurement. Its main control chip is Espressif’s ESP32, which has built-in support for Wi-Fi and Bluetooth connections, and computing speeds of up to 240Mhz. This provides a favorable guarantee for image output with a FPS reaching 7 and above. The screen is 1.14 inches and has a resolution of 135 * 240. The device comes with a rich variety of hardware resources: An on-board 6-axis Inertial Measurement Unit, a digital microphone and a power management chip and a built-in 300mAh battery, all embedded into the device. In terms of interactive operation, two programmable buttons and a rotary encoder are provided. In order to facilitate users to connect more peripherals, a 4 Pin HY2.0 interface with I2C support is provided at the bottom. The body is 3D printed from high quality Black Nylon filament. In addition, an M3 screw hole and a 1/4" screw hole are provided underside for easy mounting.

Power switch operation:

• Power on ：Long press power button for 2 seconds
• Power off ：Short press power button for 6 seconds

Features:

• ESP32-based
• Case Material: Nylon 3D print
• FLIR Lepton 3.0
• Built-in 6-Axis IMU, microphone
• Buttons and dial encoder
• IPS LCD(1.14 inch)
• built-in Lipo Battery
• GROVE/4P HY2.0 Interface

Specifications:

• Effective Pixels: 160x120
• Field of view: 56°
• Fast imaging time: < 500ms
• Effective Frame Rate: 8.7Hz
• Input Clock: 25MHz
• Pixel Size: 12μm
• Low operating power: 150 mW (operating), 650 mW (during shutter event), 5 mW (standby)
• Scene Dynamic Range: Low Gain Mode: -10 to 400°C; High Gain Mode: -10 to 140°C
• Spectral Range: 8 to 14µm
• Thermal Sensitivity: ＜50 mK(0.050°C)
• Optimum Temperature Range: -10°C to +80°C

Applications:

• Car engine failure check
• Building dehumidification insulation sealing test
• Industrial furnace inner wall refractory crack
• Outdoor observation of animals at night

Documents:

• MPU6886
• AXP192
• SPM1423
• Lepton datasheet
• 3D Printer STL File

Package Includes:

• 1 x M5StickT2
• 1 x USB Type-C(20cm)