ODROID-H3 has same form factor and similar power efficiency as their predecessor, the ODROID-H2+. But, H3 is more powerful, offers higher performance.

With great compatibility, a brand new x86 64-bit single board computer with large memory capacity and advanced IO ports.

Note:Option (19V/7A does not include 3pin AC power cord)

Intel® Quad-Core Processor Jasper Lake N5105 has a base clock of 2GHz and a boost clock of 2.9GHz with 1.5 MB L2 and 4 MB L3 cache by a 10 nm process.
Up to 64GB Dual-channel Memory DDR4 PC4-23400 (2933MT/s)
Two SO-DIMM slots, up to 32GB per slot
PCIe 3.0 x 4 lanes for one M.2 NVMe storage
2 x 2.5Gbit Ethernet ports
2 x SATA 3.0 ports
SSE4.2 accelerator (SMM, FPU, NX, MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, SSE4.2, AES)
Intel UHD Graphics 24 EUs Turbo 800MHz(H3+:900MHz)
HDMI 2.0 and DP 1.2 multiple video outputs
A configurable Unlimited Performance mode allowing the CPU to run in sustained turbo boost mode.
RTC / BIOS backup battery is included

A. CPU (Intel Celeron N5105)

B. 2 x DDR4 SO-DIMM slots (Dual channel memory support)
C. 1 x M.2 PCI Express Module Socket (NGFF-2280)
D. 1 x eMMC (Embedded Multimedia-Card) Socket
E. 2 x SATA Power Connectors (2.5mm pitch, JST-XH compatible connector)
F. 2 x SATA3 6.0 Gb/s Data Connectors
G. 1 x DC Power Jack
H. 2 x USB 3.0
I. 2 x USB 2.0
J. 1 x HDMI 2.0
K. 1 x DisplayPort 1.2
L. 2 x RJ45 Ethernet Ports (10/100/1000/2500)
M. 5 x System LED Indicators
N. 1 x Peripheral Expansion Header (24-pin)
O. 1 x Power Switch
P. 1 x Reset Switch
Q. 1 x Backup Battery Connector (2-pin)
R. 1 x Active Cooling Fan Connector (4-pin)
S. 1 x Audio out, 1 x Audio in, 1 x SPDIF out
-On the H3+ board, a yellow round sticker is attached on the product serial label and, on the H3 board, a green round sticker is attached.

Specifications:

Processor	Intel Celeron N5105(H3+: N6005) Processor (10nm, Quad-Core, TDP 10W)
	H3(N5105) : up to 2.9GhzH3+(N6005) : up to 3.3Ghz
	4MB L2 Cache
	Intel UHD Graphics (24/32 EU up to 900MHz)
Memory	2 x DDR4 1.2V SO-DIMM slots
	Dual Channel, up to 2933 MT/s (DDR4-PC23400)
	Max memory capacity 64GB
	DDR3/DDR5 are not supported
Storage	1 x eMMC connector (bootable and selectable on BIOS)
	Various eMMC modules can be purchased at Hardkernel store
	2 x SATA3 6Gbps
	1 x M.2 slot (PCIe 3.0 x 4, supports NGFF-2280 cards)
	M.2 SATA SSD is not supported
Networking	2 x GbE LAN ports (RJ45, supports 10/100/1000/2500 Mbps)
	Realtek RTL8125B
	Supports Wake-On-Lan
	LED indicators (Green: Link, Amber: Traffic)
Video	1 x DisplayPort 1.2 (up to 4K@60Hz)
	1 x HDMI 2.0 (up to 4K@60Hz)
	Dual simultaneous display support
Audio	1 x Audio out (3.5mm jack)
	1 x Audio in (3.5mm jack)
	1 x SPDIF out (ALC1200, HDA codec)
	* HDMI & DP have audio output too.
External I/O	2 x USB 3.0 Host ports
	2 x USB 2.0 Host ports
	1 x Peripheral Expansion Header (24-pin, 2.54mm pitch)
	– 1 x DC 5V, 1 x DC 3.3V, 5 x GND
	– 1 x UART (TXD/RXD/RTS/CTS)
	– 2 x I2C (SCL/SDA)
	– 1 x External Power Button
	– HDMI CEC, 5VA+
	– Three USB 2.0 ports
	– All 3.3V I/O signal level
Other features	Passive Heatsink
	BIOS Backup Battery
	– Maintains system time and BIOS settings
	Power Button
	Reset Button
	System LEDS Indicators:
	– Red (PWR) – Solid light when DC power is supplied
	– Blue (left, SLEEP) – turns off only when the system enters into suspend mode
	– Blue (right, PMIC) – turns on only when the major power rails are working
	– Amber (SATA) – Flashes when SATA data transfers
	– Green (NVMe) – Flashes when NVMe data transfers
	Active Cooling Fan Connector (12V 4-pin, PWM input + TACHO output)
	– Active Cooling Fan is optional
	– Connector (4-pin, 2.54mm pitch)
Power	DC jack : outer (negative) diameter 5.5mm, inner(positive) diameter 2.1mm
	DC 14V ~ 20V (up to 60W)
	– DC 15V/4A power adapter is recommended if you don’t use two 3.5“ HDDs
	– DC 19V/7A power adapter is recommended if you two 3.5” HDDs together
	Power consumption:
	– IDLE : ≃1..9W
	– CPU Stress : ≃15W
	– CPU+GPU Stress : ≃18W
	– Power-off : ≃0.25W
	– Suspend : ≃0.6W
Form Factor	110mm x 110mm x 47mm Approx.

Note:

The supplier of the product has no replacement and/or refund policy as part of their product warranty/guarantee. Furthermore, the repair cost and the cost of shipping to and fro from South Korea has to be borne. As Fab.to.Lab is merely an intermediary we extend the exact same warranty terms to all customers of Harkernel.

Please find more details here: Supplier warranty terms and conditions: https://www.hardkernel.com/agreement/

Documentation:

Package Includes: