• Processor :
  • GPU : Mali-G31 Dvalin
  • CPU : RockChip RK3326(Quad-Core ARM Cortex-A35 1.3GHz)

• Memory : 1GB (DDR3L 786Mhz, 32 Bits bus width)
• Storage : 
  • SPI Flash(16Mbytes Boot) 
  • Micro SD Card slot(UHS-1 Capable interface)
• Display : 3.5inch 320×480 TFT LCD (ILI9488, MIPI interface)
• Audio : 
  • Earphone Jack 
  • 0.5Watt 8Ω Mono
• Battery : Li-Polymer 3.7V/3000mAh, Up to 9 hours of continuous game playing time
• DC Jack :
  • 5V input, USB-C
  • power connector: A USB-C charging cable is included in the package.
• External I/O : USB 2.0 Host x 1, 10Pin port(I2C, GPIO, IRQ at 3.3Volt)
• Input Buttons : F1, F2, F3, F4, F5, F6, A, B, X, Y, Direction Pad, Left Shoulder, Right Shoulder, Left Shoulder2, Right Shoulder2, Analog joystick
• Wireless : Built-in 2.4Ghz 802.11b/g/n (ESP-WROOM-S2)
• Power consumption : : 
  • Game emulation: 300 ~ 550mA (depends on backlit brightness and type of game emulations and the wireless usage)
  • Power off mode <1mA
  • If you turn off the WiFi, the power consumption will be same as the previous Revision 1.0.
• Charging time :2.5~3 hours when the device turns off. When you play game, it takes 4~5 hours.
• Dimensions :155x72x20 mm (6.1×2.8×0.8 inch), Weight: 180 g (6 oz)

Diagrams:

Assembly Guide:

https://wiki.odroid.com/odroid_go_advance/go_adv_assembling

Note: 

The supplier of the product has no replacement and/or refund policy as part of their product warranty/guarantee. Furthermore, the repair cost and the cost of shipping to and fro from South Korea has to be borne. As Fab.to.Lab is merely an intermediary we extend the exact same warranty terms to all customers of Harkernel.

Please find more details here: Supplier warranty terms and conditions: https://www.hardkernel.com/agreement/

Force Power OFF:

Disassembly Guide:

Note: 8GB or higher capacity MicroSD card is additionally required. 

• 1 x USB Type-C Power Cable
• 1 x Top enclosure
• 1 x Bottom enclosure
• 1 x Plastic L/R/L2/R2 trigger, X, Y, power Buttons
• 1 x Plastic D-pad, A, B Buttons
• 1 x ODROID-GO-Advance board
• 1 x 3000mAh battery
• 1 x LCD window
• 1 x I ~ VI button rubber
• 1 x D-PAD rubber
• 1 x A, B, X, Y button rubber
• 1 x battery sticker
• 1 x Analog joystick
• 1 x 320×480 TFT LCD
• 1 x 0.5W speaker
• 7 x 1.7×5 screws
• 4 x 1.7×8 screws
• 1 x Driver