CatSniffer is an original multiprotocol and multiband board made for sniffing and communicating with IoT (Internet of Things) devices. CatSniffer can operate in 3 different frequencies (LoRa, sub 1 GHz, and 2.4 GHz) and is an auditing tool for security researchers looking into IoT security.

It was designed as a highly portable USB stick that integrates the new generation of the chips TI CC1352, Semtech SX1262, and Microchip SAMD21E17.

Protocols:

Thread
Zigbee
Bluetooth 5 Low Energy (BLE)
IEEE 802.15.4g
6LoWPAN (IPv6 over Low power Wireless Personal Area Networks)
Sub 1GHz and patented systems
LoRa/LoRaWAN

The board can be used with different types of software including third-party sniffers such as SmartRF Packet Sniffer, Sniffle, zigbee2mqtt, Z-Stack-firmware, or you can even write your own firmware for your hacking needs.Official CatSniffer firmware at github.

Features:

“The SimpleLink™ CC1352P device is a multiprotocol and multi-band Sub-1 GHz and 2.4-GHz wireless microcontroller (MCU) supporting Thread, Zigbee®, Bluetooth® 5.2 Low Energy, IEEE 802.15.4g, IPv6-enabled smart objects (6LoWPAN), MIOTY®, Wi-SUN®, proprietary systems”.
CatSniffer uses SAMD21E17 as a USB-UART bridge to communicate with CC1352 chip, it’s not necessary manual driver installation (exceptions could exist).
Compatible OS: Windows, Linux, and MAC
Auto program through the bootloader from TI CC (as long as it’s not disabled in the code). No need external programer and it can be debugged with cJTAG through the default pin.
Antenna SMA port, for an Antenna of your choice
LEDs of general-purpose
Reset button for SAMD21 & CC1352, Boot of CC1352, and one more for general purpose.

Compatible Software: