• Gravity: Analog pH Sensor / Meter Kit For Arduino
Need to measure water quality and other parameters but haven't got any low cost pH meter? Find it difficult to use with Arduino? DFRobot analog pH meter, specially designed for Arduino controllers and has convenient and practical "Gravity" connector and a bunch of features. Instant connection to your probe an your Arduino to get pH measurements at ± 0.1pH (25 ℃). For most hobbyist this great accuracy range and it's low cost makes this a great tool for biorobotics and other projects! It has an LED which works as the Power Indicator, a BNC connector and PH2.0 sensor interface. To use it, just connect the pH sensor with BND connector, and plug the PH2.0 interface into the analog input port of any Arduino controller. If pre-programmed, you will get the pH value easily. Comes in compact plastic box with foams for better mobile storage.
 
Build your own PH meter gadjet, or a water monitoring station for your water tanks. This and our other water sensor devices could make for the ultimate water control device. Use it for your  aquaponics or fish tanks or other materials that need measurements. 
 
 
 
What is pH?  
 
“pH stands for power of hydrogen, which is a measurement of the hydrogen ion concentration in the body. The total pH scale ranges from 1 to 14, with 7 considered to be neutral. A pH less than 7 is said to be acidic and solutions with a pH greater than 7 are basic or alkaline.” 
 
 
 
Note: Buffer solutions are not included.
 
Note: After you received your package! You may found some white particles on the protection foam which is the KCl crystallization from the cap. Please don't worry about the crystallization in the packing box, that's normal. Actually, since the transportation restriction on liquid, we have poured out the KCL3N solution in the cap, the slight crystallization in the packing box should be leaked since the remnant. Anyway, once you received the probe, you should store it in KCL3N solution, you can not leave it in dry circumstance.
 
For pH Buffer Powder click here
 
APPLICATIONS
 
Water quality testing
Aquaculture
 
SPECIFICATION
 
Module Power : 5.00V
Module Size : 43 x 32mm(1.69x1.26")
Measuring Range :0 - 14PH
Measuring Temperature: 0 - 60 ℃
Accuracy : ± 0.1pH (25 ℃)
Response Time : ≤ 1min
pH Sensor with BNC Connector
pH2.0 Interface ( 3 foot patch )
Gain Adjustment Potentiometer
Power Indicator LED
 
DOCUMENTS
 
 
SHIPPING LIST
 
pH probe (BNC connector)  x1
pH sensor circuit board       x1
Analog cable                      x1

Write a review

Please login or register to review

Gravity: Analog pH Sensor / Meter Kit For Arduino

  • Brand: DFRobot
  • Product Code:DFR-Gravity-Sensor-pH-Module
  • Reward Points:28
  • Availability:In Stock
  • रo 2,846.00
  • रo 2,391.00

  • Price in reward points:2846

Related Products

Analog pH Meter Kit

Analog pH Meter Kit

Need to measure water quality and other parameters but haven't got any low cost pH meter? Find it di..

रo 1,700.00

Gravity: Analog pH Sensor / Meter Pro Kit For Arduino

Gravity: Analog pH Sensor / Meter Pro Kit For Arduino

This is a professional Arduino pH Sensor Meter Kit with industrial  electrode. It has built-in simpl..

रo 5,021.00 रo 5,786.00

Gravity: Analog Turbidity Sensor For Arduino

Gravity: Analog Turbidity Sensor For Arduino

The arduino turbidity sensor detects water quality by measuring level of turbidity. It is able to de..

रo 825.00 रo 982.00

Gravity: Analog Spear Tip pH Sensor / Meter Kit

Gravity: Analog Spear Tip pH Sensor / Meter Kit

This spear tip pH sensor/meter kit can directly stab into semisolid material to measure the pH value..

रo 8,607.00 रo 9,919.00

Gravity Analog UV Sensor V2

Gravity Analog UV Sensor V2

INTRODUCTION   This UV Sensor with GUVA-S12SD chip is suitable for detecting the UV raditati..

रo 466.00 रo 537.00

Gravity: Analog Electrical Conductivity Sensor / Meter V2 (K=1)

Gravity: Analog Electrical Conductivity Sensor / Meter V2 (K=1)

  DFRobot Gravity: analog electrical conductivity meter V2 is specially used to measure the ..

रo 6,387.00 रo 7,258.00

Grove - PH Sensor Kit (E-201C-Blue)

Grove - PH Sensor Kit (E-201C-Blue)

Are you trying to find an easy to use and cost-effect PH sensor/meter? Do you want to use a PH senso..

रo 1,760.00

Gravity: Analog pH Sensor/Meter Kit V2

Gravity: Analog pH Sensor/Meter Kit V2

DFRobot Gravity: Analog pH meter V2 is specifically designed to measure the pH of the solution and r..

रo 3,694.00 रo 4,198.00

pH Buffer Powder

pH Buffer Powder

Buffer solutions are used as a means of keeping pH at a nearly constant value in a wide variety of c..

रo 16.00

Gravity: Analog Electrical Conductivity Sensor PRO (K=1)

Gravity: Analog Electrical Conductivity Sensor PRO (K=1)

Conductivity is the reciprocal of an object's resistivity. It represents a material’s ability to pas..

रo 16,736.00 रo 19,206.00

Gravity: I2C ADS1115 16-Bit ADC Module (Arduino & Raspberry Pi Compatible)

Gravity: I2C ADS1115 16-Bit ADC Module (Arduino & Raspberry Pi Compatible)

DFRobot I2C ADS1115 16-bit ADC module can accurately collect and convert analog signals. Through thi..

रo 1,435.00 रo 1,655.00

RS232 Shield for Arduino

RS232 Shield for Arduino

This RS232 Shield for Arduino is designed for the Arduino controller,and it can easily convert UART ..

रo 777.00 रo 895.00

Tags: Analog, pH, Meter, Kit, Arduino, Gravity

The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.

Name
Email
Phone
Comments