• FPGA Development Board based on GOWIN GW1N-UV4LQ144
• Wide range of ports/peripherals for expandability
• Easily connect to PC with the help of USB-to-JTAG module
• Can run on low voltage (3.3V)
• Built-in oscillator with 12MHz frequency
• Numeric display for status display
• Eight monochrome LEDs for IO control and power indication
• RGB LEDs for IO control
• Integrated DIP switch and soft-touch keys for status control
• 2 set of 2.54mm pin headers (20 pins) for expandability

Please note that the headers are not soldered onto the board.

• Default startup mode: built-in flash
• Logic unit (LUT4): 4608
• Register (FF): 3456
• Synchronous Static Random Access Memory (S-SRAM) (bits): 0
• Burst Static Random Access Memory (B-SRAM) (bits): 180K
• Number of Burst Static Random Access Memory (B-SRAM): 10
• User Flash Memory (bits): 256K
• 18*18 Multiplier: 16
• Phase-locked loop (PLLs+DLLs): 2+2
• Total number of I/O Banks: 4
• Maximum user I/O: 207
• Core voltage (LV version): 1.2V
• Core voltage (UV version): 1.8V/2.5V/3.3V
• Peripherals/ports
  • Micro USB port (onboard USB JTAG port)
  • Common cathode 8-segment, 4-digit numeric display
  • 8-digit DIP switch
  • 8-digit LED
  • 8-digit key
  • 4 RGB LEDs (common anode)
  • 36 expanded IO ports (2.54mm pin headers)
  • Onboard crystal oscillator 12MHz

• Hardware Instructions
• Instructions for Experiments
• Software User Guide
• Schematics

Warranty: 12 months

• Warranty will not apply if Product fails or is damaged after delivery to you due to accident, abuse or misuse.

• 1 x Gowin RUNBER Development Board
• 1 x USB Type-C Cable 
• 1 x 40-pin Header