You can use the Fluke 419D laser distance meter to measure up to 80 m (260 ft.), accurate to + 1 mm. No scales to interpret or misread. The extra bright laser makes it easy to target even at long distances. The 419D will help you save time and reduce errors with enhanced features like storage for 20 complete displays, indirect Pythagoras distance calculations, and the tripod mode for stable, long-distance measurements. And, you'll be able to see the results more easily on the backlit display. No matter your job, the 419D laser distance meter provides accurate long distance measurements to help you do the work of two people on your own.

Other helpful features:

Improves visibility with backlit, three-line display
Offers minimum/maximum tracking to measure the room’s diagonal and horizontal distance from a stable measurement point
Offers battery life of 5000 measurements with automatic shut-off feature
Allows mounting on a tripod for stable long distance measurements
Includes stake out function for marking off defined measured lengths
Offers improved visibility with three-line, backlit display
Stores the last twenty 20 complete displays for quick recall
Provides strong environmental protection with IP54 (water spray and dust proof) sealing
Powered by two AAA batteries

Key Features:

Versatile laser distance meter that instantly measures up to 80 m (260 ft.) with one-button point-and-click operation
Quickly calculates area (square feet/meters) and volume
Offers enhanced Pythagoras calculation for determining distance indirectly from three other measurements
Provides easy to-use addition and subtraction function
Provides audible keypad feedback

Specifications:

Distance Measurement
Typical measuring tolerance 1	±1.0 mm 3
Maximum measuring tolerance 2	±2.0 mm 3
Range at Leica Target Plate GZM26	80 m / 260 ft
Typical range 1	80 m / 260 ft
Range at unfavorable condition 4	60 m / 195 ft
Smallest unit displayed	6 / 30 / 60 mm (10 / 50 / 100 m)
Ø Laser point at distances	6 / 30 / 60 mm (10 / 50 / 100 m)
Tilt measurement
Measuring tolerance to laser beam 5	No
Measuring tolerance to housing 5	No
Range	No
General
Laser class	2
Laser type	635 nm, < 1 mW
Protection class	IP54
Automatic laser off	After 90 seconds
Automatic power off	After 180 seconds
Battery life (2 x AAA) 1.5 V NEDA 24A/IEC LR03	Up to 5,000 measurements
Size (L x W x D)	127 x 56 x 33 mm
Weight (with batteries)	153 g
Temperature range Storage operation	-25°C to +70°C (-13°F to +158°F)
Temperature range Storage operation	-10°C to +50°C (14°F to +122°F)
Calibration cycle	Not applicable
Maximum altitude	3000 m
Maximum relative humidity	85% at 20°F to 120°F (-7°C to 50°C)
Safety	IEC Standard No. 61010-1:2001
Safety	EN60825-1:2007 (Class II)
EMC	EN 55022:2010
	EN 61000-4-3:2010
	EN 61000-4-8:2010
1. Applies for 100% target reflectivity (white painted wall), low background illumination, 25°C. 2. Applies for 10 to 500% target reflectivity, high background illumination, -10°C to +50°C. 3.Tolerances apply from 0.05 m to 10 m with a confidence level of 95%. The maximum tolerance may deteriorate to 0.1 mm/m between 10 m to 30 m and to 0.15 mm/m for distances above 30 m. 4. Applies for 100% target reflectivity, background illumination between 10'000 lux and 30'000 lux. 5. After user calibration. Additional angle related deviation of ±0.01° per degree up to ±45° in each quadrant. Applies at room temperature. For the whole operating temperature range the maximum deviation increases by ±0.1°.