Swipe, tap or flick your wrist to control your Raspberry Pi with the Flick pHAT.
Flick Zero is a 3D tracking and gesture pHAT that lets you control the Raspberry Pi Zero mini-computer as if by magic! Flick uses technology that enables the PCB to detect your gestures from up to 15cm away in 3D space. Draw a circle, swipe your hand – Flick will track it.
Integrate Flick into your Raspberry Pi project to give you multiple ways of controlling it. Using the near field gesture technology, you’re able to hide your project behind non-conductive material (wood/acrylic) and still use Flick (please note however that mounting it in this way may reduce the sensor range).
Plug and play functionality allows you to get up and running within minutes. Use our software libraries (complete with one-line installer) to fully explore what you can do with Flick. Control your computer, TV, music system and more all with a Flick of the wrist!
Features
-
Fully compatible with Pi Zero & Pi Zero W
-
Also works with Raspberry Pi A+, B+, 2B, 3B and all other Raspberry Pis with 40 GPIO pins (or compatible boards).
-
3D tracking
-
Gesture sensing up to 15cm
-
Touch and Tap sensing
-
Communicates with the Raspberry Pi via I2C
-
Full software libraries (fully open-source code)
-
One-line installer
-
No soldering required
-
Dimensions: 6.5cm x 3cm x 0.6cm
-
Fully CE and FCC tested and approved
Technical Details
-
Chip: MGC3130 3D Tracking and Gesture Controller
-
Detection range: 0 to 15 cm in ideal circumstances
-
Temperature Range: -20℃ to +85℃
-
Position Rate: 200 positions/sec
-
Spatial Resolution: up to 150 dpi
-
Proximity and Touch Sensing
-
Flick Large has a red/green dual RGB LED that can be driven using pins LED1 and LED2
-
Flick Large has level shifting on board so can work with any microcontroller with either 5V or 3V3 power and data signals
-
Compatible with the Hillstar Development Kit over USB on PC in order to use with a computer or to program new firmware onto the board.
-
Available gestures: Swipe (east to west, west to east, north to south, south to north), tap and double tap (center, east, west, north, south), airwheel (clockwise, anti-clockwise) and touch (center, east, west, north, south)
-
Works even through the Flick Large case
-
No detection blind spots
-
Low–power design
Technical Details
| Dimensions | 130mm x 75mm x 25mm |
| Weight | G.W 50g |
| Battery | Exclude |
Part List
| Flick Zero | 1 |
| Plastic bolts | 8 |
| Plastic spacers | 4 |
| Stickers | 3 |
| Info card | 2 |
Documents
Flick Zero – 3D Tracking and Gesture pHAT for Raspberry Pi Zero
- Product Code:Seeed-Flick-HAT-Rpi-Zero
- Reward Points:34
- Availability:Order now and get it in 15 days
-
रo 3,399.00
- Price in reward points:3399
Related Products
Raspberry Pi Zero Starter Kit
Yes, it is finally here. This is a super cheap single board computer. Hey! You get a working co..
रo 2,585.00 रo 3,285.00
Raspberry Pi Zero W with Case
Raspberry Pi Zero W with Case If you didn't think that the Raspberry Pi Zero could possibly get ..
रo 1,650.00
Raspberry Pi Zero
The new Raspberry Pi Zero is an super-ultra-low-cost, tiny-small-form-factor Raspberry Pi! Feat..
रo 1,035.00
Raspberry Pi Zero W Starter Kit
This is super cheap single board computer. Hey! you get a working computer, it is cheaper than any A..
रo 3,585.00
Raspberry Pi Zero W Barebones Kit
The Pi Zero w Barebones kit is the most basic essentials. You can easily assemble with your Pi Zero ..
रo 2,666.00
Raspberry Pi Zero W Basic Kit
The Pi Zero w Basic kit is almost everything you need. You can easily assemble with your Pi Zero w. ..
रo 4,666.00
Raspberry Pi Zero W Complete Starter Kit
The Pi Zero w starter kit is including everything you need. You can easily assemble with your Pi Zer..
रo 3,866.00
Raspberry Pi Zero W
Raspberry Pi Zero W is a super-compact, hackable, and ultra-low cost computer, This is the version w..
रo 1,552.00
