The SIM7600G is an integrated wireless communication module. It features 4G CAT1 with an uplink speed of 5Mbps and a downlink speed of 10Mbps, and supports GNSS positioning (GPS, BD, GLONASS). The module is compatible with Raspberry Pi, Arduino, and LattePanda single-board computers, and can be used as a 4G network card.

The specific bands are as follows:

• LTE-TDD: B34/B38/B39/B40/B41
  
• LTE-FDD: B1/B2/B3/B4/B5/B7/B8/B12/B13/B18/B19/B20/B25/B26/B28/B66
• UMTS/HSDPA/HSPA+: B1/B2/B4/B5/B6/B8/B19
• GSM/GPRS/EDGE: 850/900/1800/1900MHz

Additionally, the SIM7600G module integrates support for various network protocols including TCP/IP, IPV4, Multi-PDP, FTP, FTPS, HTTP, HTTPS, DNS, and more. This enables complex network communications via AT commands without the need to learn or understand the underlying network protocols, offering strong compatibility and ease of use.

The SIM7600G communication module features UART and USB interfaces. It can connect to Raspberry Pi, LattePanda single-board computers, and other devices via UART or as a USB network card through the USB interface. It supports drivers for mainstream operating systems such as Windows, Linux, and Android.

Furthermore, the SIM7600G module includes a microphone and audio power amplifier circuit, enabling data transmission, voice calls, and text messaging. When combined with GNSS positioning, it can be conveniently used in scenarios like anti-theft, logistics, and transportation.

The SIM series wireless communication modules offer multiple products to choose from. This series of 4G products is differentiated by communication rates and satellite positioning capabilities. Click here to check the selection guide of 4G communication modules.

Functional Diagram of SIM7600G 4G Module

Connection Diagram of SIM7600G 4G Module and Arduino UNO

Features:

• Controlled via AT commands, eliminating the need to learn complex underlying network protocols.
• Supports GNSS satellite positioning (GPS, GLONASS, BD).
• Supports multiple frequency bands including LTE-FDD, LTE-TDD, WCDMA, and GSM.
• SMS functionality supports MT, MO, CB, Text, and PDU modes.
• Supports various network protocols such as TCP/IP, IPV4, Multi-PDP, FTP, FTPS, HTTP, HTTPS, and DNS.
• Capable of data communication, voice calls, and SMS functionalities.
• Provides USB network card functionality.

Specifications:

• Power Supply Voltage: Terminal connector: 5-12V

                                        TYPE-C: 5V

• UART Interface: Voltage level: 3.3V-5V

              Physical interface: PH2.0-4P Gravity sequence standard

• Audio Output Interface: PJ2.0-2P
• Frequency Band Applicable Regions: Global
• Supported Bands:

               LTE-TDD: B34/B38/B39/B40/B41

               LTE-FDD: B1/B2/B3/B4/B5/B7/B8/B12/B13/B18/B19/B20/B25/B26/B28/B66

               UMTS/HSDPA/HSPA+: B1/B2/B4/B5/B6/B8/B19

               GSM/GPRS/EDGE: 850/900/1800/1900MHz

• 4G Communication Rate: CAT1 (Uplink speed 5Mbps, Downlink speed 10Mbps)
• GNSS Satellite Positioning: GPS, BD, GLONASS
• 4G Antennas: MAIN antenna IPEX male connector ×1

                   AUX antenna IPEX male connector ×1

• GNSS Antenna: IPEX antenna male connector ×1
• Voice Microphone: ×1
• SIM Card Slot: Push-lock type
• LED Indicators: Power status: Red

                   Network status: Blue

• Operating Temperature: -40°C ~ 85°C
• Product Dimensions: 60mm×52mm

Applications:

• IoT data transmission and remote control
• Mobile device monitoring
• Logistics and transportation
• Warehousing and theft prevention
• Surveillance and positioning

Documentations:

• Product wiki
• Schematic
• AT Command Set
• 2D_CAD
• 2D_DXF
• 3D_STP

Package Includes:

• 1 x CAT1: SIM7600G 4G Communication Module
• 1 x 4G TEL, GPS antenna pack
• 1 x Triple-cut universal SIM card adapter
• 1 x Gravity PH2.0-4P Communication Connection Cable