• A Servo is the most commonly used as actuator in robotics. Combine some servos with a Camera for Raspberry Pi (Not included in the kit) and you can build a pan and tilt automated home monitoring system that will keep your home and family safe.
• A UV sensor is an excellent tool for a wearable device. 

• Advanced Kit for Raspberry Pi 2 with Raspberry Pi
• Install the windows 10 IoT system into the Micro SD Memory Card

Unboxing do Advanced Kit for RaspberryPi 2

Features :

• An affordable and user-friendly IoT system
• Easily available open source code on Github
• Develop software using Visual Studio 2015
• Compatible with hundreds of different sensors

• Raspberry Pi 2 Model B
  • Broadcom BCM2836 900MHz quad-core ARM Cortex-A7 CPU
  • 1GB LPDDR2 SDRAM
  • 4 x USB 2.0 Ports
  • Video Out via full HDMI, 3.5mm A/V Jack or Raw LCD (DSI) interface
  • Audio Out via 3.5mm A/V Jack or Audio over HDMI
  • Audio In via CAMERA interface
  • Storage: micro SD slot
  • 10/100 Ethernet (RJ45)
  • Low-Level Peripherals:
  • 26 x GPIO
  • UART
  • I2C bus
  • SPI bus with two chip selects
  • +3.3V
  • +5V
  • Ground
  • Power Requirements: 600mA up to 1.8A@5V via MicroUSB or GPIO Header
• Arduino Expansion Shield for Raspberry Pi 2 model B 
  • Onboard Microcontroller: ATmega32u4
  • Arduino Leonardo Chip
  • Arduino Compatible pin mapping
  • Compatible with All arduino standard shield and sensors
  • System Voltage: 5v
  • Arduino Digital I/O: 20
  • Arduino Analog I/O: 6
  • Raspberry Pi B+ GPIO: 16
  • Raspberry Pi B+ I2C: 1
  • Raspberry Pi B+ ID_I2C: 1
  • Raspberry Pi B+ SPI: 1
  • Raspberry Pi B+ TTL UART: 1

Documents :

• 1 x Raspberry Pi 2 model B
• 1 x CAT 5 Ethernet Cable (1m Metal Connector)
• 1 x MicroSD Memory Card (16GB Class10 SDHC with Adapter)
• 1 x NILLKIN AC/DC Adapter 5V@2A (American Standard)
• 1 x Arduino Expansion Shield for Raspberry Pi B+ (Compatible with RPi 2 Model B)
• 1 x Self-adhesive Pure Copper Heatsink For Raspberry Pi
• 1 x High Speed HDMI Cable (0.75M, Gold Plated)
• 1 x Digital Push Button (White)
• 1 x Digital Push Button (Blue)
• 1 x Analog ADKeyboard Module V2
• 1 x Digital Green LED Light Module
• 1 x Digital RED LED Light Module
• 1 x Digital Blue LED Light Module
• 1 x Analog LM35 Linear Temperature Sensor
• 1 x Analog Rotation Sensor V2
• 1 x Analog Ambient Light Sensor
• 1 x Analog Sound Sensor
• 1 x Sharp GP2Y0A21 Distance Sensor (10-80cm)
• 1 x Relay Module V3.1 (Arduino Compatible)
• 1 x Digital Buzzer Module
• 1 x 9g micro servo (1.6kg)
• 1 x PIR (Motion) Sensor
• 1 x Triple Axis Accelerometer MMA7361 
• 1 x Soil Moisture Sensor (Arduino Compatible) Immersion Gold
• 1 x Joystick Module V2