The Danfoss CG150-2 CAN Interface is an element of the PLUS+1® family of mobile machine management products. The CG150-2 provides a compact and cost effective gateway interface between PLUS+1® Compliant modules on the PLUS+1® Controller Area Network (CAN) and a personal computer (PC) USB port.

Description:

The CG150-2 communicator provides the application download of programs to PLUS+1® Compliant devices on the PLUS+1® CAN network and upload/download of application tuning parameters. Device drivers are imbedded in the PLUS+1® GUIDE (Graphical User Integrated Development Environment) service and diagnostic tool software. The CG150-2 is compatible with Bosch CAN standard 2.0 A & B (standard and extended data frames) and USB standard 2.0 (Hi-speed).

Features:

USB powered
Supports CAN bit rates up to 1000 kb per second
CAN messages are time-stamped in 100 ms increments
Supports both 11-bit (CAN 2.0A) and 29- bit (CAN 2.0B) identifiers
Supports data and remote frames
Equipped with 110 cm [44 in] length USB cable and 30 cm [12 in] length CAN cable
Interface the CAN bus with 9-pin D-SUB connector
Designed for USB 2.0 (Hi-speed)
Microsoft Windows XP®; 7; and 8 platforms
Plug and Play installation

Product information:

Danfoss 11153051 CG150-2 CAN USB INTERFACE

Manufacturer: Danfoss
Condition: New, unused and with original packaging
Productgroup: Electronic Controls
Productline: Controllers
Productset: Cable
Materialnumber: 11153051
Product number: HY15002
Weight: 0.185 kg
Length: 400 mm
Width: 260 mm
Height: 20 mm

CG150-2 CAN USB INTERFACE

Cable for Computer USB-port in order to connect to the machine SUB-D connector with CAN-BUS.
This cable is needed to adjust parameters on a Danfoss PLUS+1 controller.

Documentation: