A single XYNC comes equipped with four or eight removable XTRX boards, metal installation brackets, cables for all of the TX/RX ports and the GPS port, and a special board for synchronizing the XTRX units. Each onboard XTRX provides two transmit channels and two receive channels. Thus, XYNC Octo (with eight XTRX units) has 16 transmit and 16 receive channels. Two XYNC Octos can be synchronized and will give you 32 transmit and 32 receive channels.
On the digital side, each XTRX unit is connected to a PCIe switch that multiplexes the XTRX PCIe lanes into a single PCIe 2.0 x4 connector. This makes it very compact and easy to install into a standard PC. Just don’t forget to provide enough air flow for cooling, as setups like this can get quite hot.
Features & Specifications:
- RF Chipset: 8x Lime Microsystems LMS7002M FPRF
- FPGA: 8x Xilinx Artix 7 50T
- Channels: 16×16 MIMO
- Sample Rate: ~0.2 MSPS to 120 MSPS per channel (subject to the limitations explained above)
- PCIe Throughput: PCIe x4 Gen 2.0, 16 Gb/s
- RF Amplifier: Qorvo QPL9503SR
- RF Output Power: 0 to 10 dBm depending on frequency
- RF Bandwidth: 1.4 MHz to 130 MHz
- Tuning Range: 30 MHz - 3.8 GHz
-
RX/TX Range:
- 10 MHz - 3.7 GHz
- 100 kHz - 3.8 GHz with signal level degradation
-
Reference Clock:
- Stability w/o GPS: 100 ppb from 0°C to 70°C
- Stability w/GPS: <10 ppb stability after GPS/GNSS lock
- Form Factor: full-size PCIe
- Bus Latency: <10 µs, stable over time
- Synchronization: synchronize two XYNC boards directly or more than two XYNC boards with an external clock distribution network
Package Includes:
- 1 x XYNC Octo
XYNC Octo
- Brand: Crowd Supply
- Product Code:CS-XYNC-Octo
- Reward Points:10193
- Availability:Contact us
-
रo 1,019,304.00
- Price in reward points:1019304
