SenseCAP S2100 Data Logger can connect to MODBUS-RTU RS485/Analog/GPIO sensors and transmit data from sensors to the LoRaWAN network. Benefits from LoRa and IP66 design, this device features stability and reliability and can cover a long transmission range while keeping ultra-low power consumption, ideal for outdoor use. It is specifically optimized for OTA with built-in Bluetooth, which enables quick setup and update. It can be battery-powered or connected to a 12V external power supply. When the 12V power supply is connected, the replaceable built-in battery is set to be used as the backup power supply. What's more, with the help of S2110 converter, S2100 Data Logger is able to connect to Grove Sensor, it is an ideal solution for developing, fast prototyping, and small deployment for DIY Industrial level LoRaWAN Sensors.

S2100 LoRaWAN Data Logger supports MODBUS-RTU RS485/Analog/GPIO input and transmit the data from sensors to the LoRaWAN network.

It can cover a transmission range of 2km in urban scenes and 10km in line-of-sight scenes while keeping lower power consumption during the transmission process. It supports -40 ~ 85℃ operating temperature and can be deployed in harsh environments. With Bluetooth 5.0 for easy configuration and firmware upgrade, It is also compatible with a wide range of frequencies(863MHz ~928MHz), different gateways, and LoRaWAN network servers.

Power Source Option:

Option 1: the data logger can work in Periodic mode. Powered by a built-in 19Ah Standard D-size Li-SOCl2 battery which is easy to buy online, it can be installed and deployed in an outdoor environment without additional power.
Option 2: the data logger can work in Constant Power mode with an external 12V DC power supply. We provide a matching Junction Box Kit so that the data logger can be quickly assembled.

Support Industrial Sensors of Different Interfaces

S2100 LoRaWAN Data Logger is a single-channel collector, and only supports one of the following protocols at one time:

RS485: Support standard RS485 Modbus-RTU protocol
Analog: 2 x 0~10V or 2 x 4~20mA.
GPIO: 1 x GPIO, collect level or pulse signal.
RS485:

Analog

Water Leak Detector
Liquid Level Sensor

GPIO

Water Leak Detector
Rain Gauge RG-15

System Architecture:

LoRaWAN gateways can provide LoRaWAN network coverage which is required when using S210x. S210X can be connected to different LoRaWAN gateways. Here at Seeed, we provide 2 options for choosing the gateways.
Helium Network: Sensors work in areas covered by Helium Network (Helium Explorer). Seeed offers 2 gateways for Helium network - SenseCAP M1 and SenseCAP M2.
LoRaWAN Network: S21XX is fully compliant with LoRaWAN specifications and can be used with gateways support different LNS like The Things Network, Loriot, Chirpstack, etc. we also provide SenseCAP Outdoor Gateway and the indoor SenseCAP M2 Multiplatform Gateway to help you use S210X seamlessly.

Cloud Service:

Seeed provides the SenseCAP Portal platform and SenseCAP Mate APP to help users better manage and check data remotely.

SenseCAP Portal is a web service to enable users to manage SenseCAP devices and view data through the web.

Bind and manage all devices in one account
Includes Dashboard, Device Management, Data Management, and Access Key Management
Provides MQTT and HTTP API to users for further development

SenseCAP Mate is a powerful APP for data visualization and remote device management.

Save time - provides a scan-and-play experience to enable users to complete the whole configuration in 4 steps
Works for people with less or no technical background to get started with sensor data easily
Acquire and view data on clean user interfaces
Set time intervals: improve the battery efficiency
Set threshold values: focus on the data you need to take action for - coming soon
Send alarms if data is out of the safe range - coming soon

Apart from working with existing sensor nodes, the S2100 data-logger can also be connected with SenseCAP S2110 Grove Converter to achieve a plug-and-play outdoor LoRaWAN sensor deployment experience with various selections of Grove Sensors. It is an ideal solution for developing, fast prototyping, and small deployment for DIY Industrial level LoRaWAN Sensors. Moreover, you can use your existing Seeed Grove Sensors to build your outdoor LoRaWAN sensors without coding. You should try out this kit.

We are well aware that the sensors may work under harsh outdoor conditions. To ensure that the performance and durability of the sensors are consistent with their specifications throughout the complete lifecycle, SenseCAP S210X went through 6 reliability tests before releasing and met the requirements to perform perfectly in extreme conditions.

High-Low Temperature Test - determine performance under adverse temperature conditions.
Conformance Test - whether the collected values of multiple devices are consistent
Waterproof Test
Freezing Test
Long-Range Communication Test - whether the device loses packets under long-distance transmission
R&D and Production Test - to test the pass rate of multiple devices under factory conditions

Specifications:

Interface

Current Input: 4 to 20 mA (2 channel)
Voltage Input: 0 to 10V (2 channel)
RS485: RS485 Modbus-RTU Protocol

General Parameters

Product Model: SenseCAP S2100
Microcontroller: Wio-E5
Support Protocol: LoRaWAN v1.0.3 Class A
Built-in Bluetooth: App Tool to change parameters and set data conversion algorithm
Long-Range Channel Plan: IN865/EU868/US915/AU915/ AS923*
Max Transmitted Power: 19dBm
Sensitivity: -136dBm@SF12 BW=125KHz
Communication Distance: 2 to 10km (depending on and environment)
IP Rating: IP66
Operating Temperature: -40 to +85 °C
Operating Humidity: 0 to 100 %RH (non-condensing)
Device Weight: 280g
Certification: CE / FCC / RoHS

Battery (Contained in equipment)

Battery Life: Up to 10 years**
Battery Capacity: 19Ah (non-rechargeable)
Battery Type: Standard D-size SOCl2 Battery

* Every single device can support 7 frequency plans.

** This data logger supports up to 10 years of battery life, but the actual battery life varies from data upload interval, data payload, and distance between gateways.

Long Range Frequency:

Note: No Frequency limitation. Sensor switched to other frequency plans at any time.

S210x Devices are manufactured to support the universal frequency plan from 863MHz ~928MHz in one SKU. That is to say, every single device can support the frequency plans below:

The frequency plan setting is none by default and it will not transmit an RF signal until it has been set by App via Bluetooth at the first power-up. And it can be changed to other frequency plans at any time.

Application: