The P2 Edge Module with 32MB RAM is a simple way to get started with the Propeller 2 multicore microcontroller. In addition to speeding development, this module provides an optimal P2 building block for system integrators and designers to include in their products.
- The Propeller 2 P2X8C4M64P is an 8-core 32 bit CPU with 32-bit timers, 64-bit CORDIC math solver, and custom analog pad rings with Smart-pin functionality at all 64 I/O pins. Each Smart I/O pin is capable of many autonomous analog and digital functions, including ADC, DAC, PWM, USB, SERIAL, Waveform generation, SMPS, Comparator, SCHMITT and LOGIC modes.
- The P2 Edge Module with 32MB RAM includes the 100-pin TQFP P2X8C4M64P, core and I/O power regulators, power filtering capacitors, crystal, flash memory, boot configuration switches, microSD card socket, and two user-configurable on-board LEDs to indicate system states. This version of the Edge module adds 32MB of RAM to the original P2-EC, and has 46 free I/O’s available at the edge connector. The PCB’s multi-layer design features solid thermal and signal reference planes isolating each signal layer. The design is optimized for low-noise analog and digital operation, and with low temperature rise even at high-speed operation.
- For development, the P2 Edge Module fits in the card edge socket of the spacious P2 Edge Module Breadboard, the compact P2 Edge Mini Breakout Board, or the bare-bones P2 Edge 80-pin Adapter Kit. For product integration, several edge socket choices are available from our P2 Components shop page. This arrangement allows developers to integrate the Propeller 2 into products without the need for multi-layer cost or expertise.
- See our Propeller 2 Documentation page and our Propeller Programming Tools Comparison Chart for more resources; you may also sign up for our P2 Newsletter here.
Features:
- Compact module with Propeller 2 P2X8C4M64P multicore microcontroller
- 6-layer* low noise, system-on-board module
- Integrated thermal plane for low temperature rise characteristics at high speed operation
- Double-sided 80 way 0.05 inch (1.27 mm) edge connector
- Orientation / module locking hole
- Two mounting holes connected to the module ground planes
- High-precision 20 MHz TCXO oscillator (+/-0.5 PPM)
- Adjustable operating frequency; recommended maximum 180 MHz clock
- Overclocking possible beyond 300 MHz; see the P2 forum for discussion
- 16 MB SPI Flash memory and microSD card socket for flexible memory management
- 32 MB 16-bit PSRAM arranged as 4x 4-bit blocks, and accessible up to 1x 16-bit with typical burst speeds of 308 MB/s
- 46 Smart I/O pins brought out to the edge connector and 18 Smart I/O pins dedicated to the on-board RAM
- Buffered LEDs on I/O pins P38 and P39, visible from both sides of the module PCB
- Onboard LED feature enable/disable switch
- Onboard 1.8 V 3-amp* switching regulator with short-circuit, over-current fault and brownout protection for the P2 core (VDD)
- Onboard 3.8, V 3-amp* switching regulator with short-circuit and over-current fault protection to supply the low-noise IO regulators for maximum efficiency*
- Onboard low-noise LDO 3.3 V regulators for the P2 smart-pins (VIO), with short-circuit and over-current fault protection
- Wide 5-16 VDC power supply input range with reverse polarity protection
- Compatible with the Prop Plug for system programming
Specifications:
- Voltage input requirements: 5-16 VDC
- Input current requirements: 100 mA recommended min, 500-1000 mA typical
- Voltage input protection: reverse voltage
- Propeller 2 chip: P2X8C4M64P (8 cogs, 512 KB shared hub RAM, 64 smart pins)
- Non-volatile memory: 16 MB (128 Mb) SPI Flash
- Volatile memory: 32 MB (256 Mb) PSRAM
- Oscillator: TCXO 20 MHz +/-0.5PPM
- Smart I/O pins: 46 accessible, 40 fully free, grouped in 8 sets of 8 I/Os
- Smart I/O pin logic voltage: 3.3 V
- Internal VDD Power Supply: 1.8 V up to 3 A*, 750 kHz* nominal switching frequency
- VIO power supplies: low noise LDO 3.3V up to 300 mA per 8 I/O pins
- Edge connector: double sided 80 way 0.05” (1.27 mm) pitch edge slot
- Programming: serial up to 2 Mbaud
- Operating temperature: -40 to +185 °F (-40 to +85 °C)
- PCB dimensions: 1.45 in x 2.04 in (37mm x 51.7mm)
Documentations:
- P2 Edge Module with 32MB RAM Product Guide
- P2 Edge Module with 32MB RAM Schematic
- Propeller 2 P2X8C4M64P Datasheet
- Propeller Programming Tools (IDEs)
- Propeller 2 Documentation
- Propeller 2 Forums
Package Includes:
- 1 x Parallax P2 Edge Module with 32MB RAM
Parallax P2 Edge Module with 32MB RAM
- Brand: Parallax Inc.
- Product Code:NR-Plx-P2-Edge-Module
- Reward Points:132
- Availability:In Stock
-
रo 13,135.00
- Price in reward points:13240
-
- 2 or more रo 13,030.00
- 6 or more रo 12,925.00
- 10 or more रo 11,630.00
- 12 or more रo 11,535.00
- 20 or more रo 11,370.00
- 100 or more रo 10,700.00