This Micro SD card adaptor allows you to easily use gigabytes of flash memory with Teensy. It can also be used on a breadboard, or with almost any AVR processor.
A 3.3 volt regulator and 5 to 3.3 volt buffer chip protects the SD card, and allows interfacing to 5 volt processors. Technical documentation is available in the Teensy reference section.
Guide for SD use on Teensy 3.0.
Teensy, Pins, Micro SD card and USB cable are sold separately
Micro SD Card Adaptor for Teensy
- Brand: PJRC
- Product Code:PJRC-MicroSD-Adapter
- Reward Points:3
- Availability:In Stock
- रo 273.00
-
रo 239.00
- Price in reward points:285
-
- 50 or more रo 272.00
- 100 or more रo 271.00
- 250 or more रo 270.00
- 500 or more रo 269.00
Related Products
Cable USB-A male to USB Micro-B male
USB-A male to USB Micro-B male cable. Length = Approx 80 cm Pictures shown are for illustrat..
रo 144.00
Header - Male, Breakaway 1x40-Pin, Straight
These 0.1" header strips are commonly used as low-cost connectors. The standard spacing allows ..
रo 6.00
-200x200.png "microSD Card with NOOBS")
microSD Card with NOOBS
16GB/ 32GB SanDisk microSD Card with NOOBS for Raspberry Pi. NOOBS is a New Out Of the Box Software ..
रo 327.00
Micro USB OTG Cable - 4 Port
This is a multifunctional USB OTG Host Hub Adapter Cable. Compatible with all tablets and ce..
रo 440.00
Cable USB-A male to USB Micro-B male - Flat Noodle Type
Flat Nnoodle type USB-A male to USB Micro-B male cable. Length = Approx 1m Note: Color may v..
रo 240.00
Adafruit 254 MicroSD card breakout board+
Not just a simple breakout board, this microSD adapter goes the extra mile - designed for ease of us..
रo 809.00
