• Teensy LC - Development Board
Teensy-LC (Low Cost) is a powerful 32 bit microcontroller board, with a rich set of hardware peripherals, at a very affordable price!
 
Teensy-LC delivers an impressive collection of capabilities to make modern electronic projects simpler. It features an ARM Cortex-M0+ processor at 48 MHz, 62K Flash, 8K RAM, 12 bit analog input & output, hardware Serial, SPI & I2C, USB, and a total of 27 I/O pins. See the technical specifications and pinouts below for details.
 
Teensy-LC maintains the same form-factor as Teensy 3.2, with most pins offering similar peripheral features.
 
Real Hardware Serial
 
Most modern projects involve serial communication with sensors, other chips, other systems, or even the internet. Hardware serial ports greatly simplify projects and enable excellent performance.
Teensy-LC provide plenty of serial connectivity: 2 SPI ports, 2 I2C, and 3 Serial ports. All 3 serial ports are supported by high quality drivers in Teensyduino, with both transmit and receive buffering, and even support for RS485 transmitter enable.
 
Teensy-LC will be ideal for inexpensive "Internet Of Things" projects when paired with a ESP8266 Wifi module, which requires a fast hardware serial or SPI port.
 
Efficient USB Communication
 
Teensy-LC has the same powerful USB hardware as Teensy 3.2. All USB data transfer is done directly to memory with minimal CPU overhead.
Teensy-LC supports USB Serial, MIDI, Keyboard (international layouts), Mouse, Joystick, and RawHID protocols. A full set of 16 bidirectional USB endpoints are supported by the hardware, allowing any type of USB device. As more USB protocols are added to Teensyduino, despite its low cost, Teensy-LC will be up the task.
 
Hardware Timers
 
Many Arduino libraries require a hardware timer. Traditional Arduino products have 3 or 4 timers, with only 1 or 2 providing more than 8 bit resolution.
Teensy-LC has a total of 7 timers, all of them with 16 or more bits of resolution, to allow excellent compatibility with easy-to-use libraries. Many combinations of popular libraries, which would normally conflict, can seamlessly run together on Teensy LC and Teensy 3.2.
 
Analog Input & Output at 12 Bit Resolution
 
Analog signals are critically important to many projects. Teensy-LC has 13 pins than can function as analog inputs. The effective analog resolution is 12 bits.
It also has a true 12 bit digital to analog converter, for an analog output signal.
 
32 bit ARM Cortex M0+ Processor
 
The Cortex-M0+ processor is a powerful, full 32 bit CPU, designed for lower power, lower cost devices.
Cortex-M0+ has fewer instructions and a simpler bus structure than the more powerful Cortex-M4 on Teensy 3.2. For simple code, M0+ often runs at similar speed, when running at the same clock frequency. For math-intensive applications, Cortex-M4 can be significantly faster, and of course it supports higher clock rates.
 
Cortex-M0+ at 48 MHz is much faster than 8 bit AVR processors at 16 MHz, especially when manipulating 16 and 32 bit variables!
 
TODO: expand this section... or add more details about the M0+ vs M4 differences.
 
5 Volt Buffer For WS2812/NeoPixel LED Projects
 
Teensy-LC provides a 5V output to directly drive WS2812/NeoPixel LEDs.
 
 
A 74LV1T125 buffer is connected to pin 17, with the increased output voltage available on another pin.
 
Compared With Teensy 3.2...
  • Some features of Teensy 3.2 simply aren't available at this lower price point.
  • The I/O pins are not 5V tolerant.
  • The maximum speed is only 48 MHz, and the Cortex-M0+ omits M4's special math instructions.
  • CAN bus is not available.
  • Teensy-LC has only 4 lightweight DMA channels, rather than 16 fully featured channels.
  • Serial1 & Serial2 have only standard buffers, not FIFOs.
  • Fewer hardware timers are available.

Technical Specifications:

Feature Teensy LC Teensy 3.1 Units
       
Processor
    Core
    Rated Speed
    Overclockable
MKL26Z64VFT4
Cortex-M0+
48
-
MK20DX256VLH7
Cortex-M4
72
96


MHz
MHz
Flash Memory
    Bandwidth
    Cache
62
96
64
256
192
256
kbytes
Mbytes/sec
Bytes
RAM 8 64 kbytes
EEPROM 1/8 (emu) 2 kbytes
Direct Memory Access 4 16 Channels
Digital I/O
    Voltage Output
    Current Output
    Voltage Input
27
3.3V + one 5V
5mA + four 20mA
3.3V Only
34
3.3V
10mA
5V Tolerant
Pins
Volts
milliAmps
Volts
Analog Input
    Converters
        Resolution
            Usable
        Prog Gain Amp
    Touch Sensing
    Comparators
13
1
16
12
0
11
1
21
2
16
13
2
12
3
Pins

Bits
Bits

Pins
 
Analog Output
    DAC Resolution
1
12
1
12
Pins
Bits
Timers
    FTM Type
        PWM Outputs
    PDB Type
    CMT (infrared) Type
    LPTMR Type
    PIT (interval) Type
    Systick
    RTC (date/time) **
7 Total
3
10
0
0
1
2
1
0
12 Total
3
12
1
1
1
4
1
1


Pins
Communication
    USB
    Serial
        With FIFOs
        High Res Baud
        Fast Clock
    SPI
        With FIFOs
    I2C
    CAN Bus
    I2S Audio
        FIFO Size

1
3
0
0
1
2
1
2
0
1
4

1
3
2
3
2
1
1
2
1
1
8
 
       
 RTC requires a 32.768 kHz crystal & 3V battery. See the Time Library for details.
      Teensy-LC has RTC logic on-chip, but lacks the oscillator & battery backup power.

Pinouts:

Teensy-LC is designed for maximum compatibility with the Teensy 3.1 footprint.

                                   Teensy-LC                                                                                                           Teensy 3.1

 

 

Write a review

Please login or register to review

Teensy LC - Development Board

  • Brand: PJRC
  • Product Code:PJRC-LC
  • Reward Points:14
  • Availability:Out Of Stock
  • रo 1,194.00
  • रo 1,229.00

  • Price in reward points:1372

  • 10 or more रo 1,189.00
  • 25 or more रo 1,184.00
  • 55 or more रo 1,179.00
  • 115 or more रo 1,174.00

Available Options


Related Products

Cable USB-A male to USB Micro-B male

Cable USB-A male to USB Micro-B male

USB-A male to USB Micro-B male cable. Length = Approx 80 cm Pictures shown are for illustrat..

रo 144.00

Ultrasonic distance measurement sensor module - HC-SR04

Ultrasonic distance measurement sensor module - HC-SR04

HC-SR04 Ultrasonic Distance Measurement sensor module. 4-Pin, One each for VCC, Trigger, Echo an..

रo 115.00

Ultrasonic distance measurement sensor module - HY-SRF05

Ultrasonic distance measurement sensor module - HY-SRF05

HY-SRF05 Ultrasonic Distance Measurement sensor module. 5-Pin, One each for VCC, Trigger, Echo, ..

रo 178.00

GH 311 Ultrasonic distance measurement sensor module

GH 311 Ultrasonic distance measurement sensor module

1、Specification 1、Voltage : 6-12V(DC) 2、Current : max 2mA 3、Output Signal : 0-5V (Out..

रo 1,150.00

Headers - Female

Headers - Female

Single row of 40-holes, female header. Can be cut to size with a pair of wire-cutters. Standard .1" ..

रo 7.00 रo 9.00

Open Softwear 2nd Edition

Open Softwear 2nd Edition

Open Softwear is a book about fashion and technology. More precisely it is a book about Arduino boar..

रo 425.00 रo 1,250.00

Teensy++ 2.0

Teensy++ 2.0

The Teensy++ USB Development Board is a complete USB-based microcontoller development system. Only a..

रo 2,357.00 रo 2,185.00

LED Pixel Strip - WS2812B

LED Pixel Strip - WS2812B

  WS2812 IC based LED pixel Strip. Specifications: Color : Black/White colored ..

रo 500.00

USB Cable with 5-Pin Micro-B Plug

USB Cable with 5-Pin Micro-B Plug

This standard USB 5-pin Micro-B cable is needed to connect Teensy LC or Teensy 3.2 to your PC or Mac..

रo 478.00 रo 546.00

USB-A male to USB Micro-B male with LED Light

USB-A male to USB Micro-B male with LED Light

With a normal USB 2.0 connector on one end and a Micro USB connector on the other .This cable lets y..

रo 144.00

Teensy 3.2-4.1 OctoWS2811 Adaptor

Teensy 3.2-4.1 OctoWS2811 Adaptor

This adaptor board connects Teensy 3.2 - Teensy 4.1 to thousands of LEDs using the OctoWS2811 Librar..

रo 1,195.00 रo 1,423.00

WIZ820io and Micro SD Card Adaptor for Teensy

WIZ820io and Micro SD Card Adaptor for Teensy

This adaptor allows you to easily use gigabytes of SD card flash memory and/or a Wiznet WIZ820io eth..

रo 717.00 रo 820.00

Teensy to WIZ812 Ethernet Adaptor Kit

Teensy to WIZ812 Ethernet Adaptor Kit

This kit lets you easily connect Teensy to a WIZ812 ethernet module.   The Arduino Ethernet ..

रo 466.00 रo 533.00

Teensy 3.2

Teensy 3.2

Teensy 3.2 features a 32 bit ARM processor. Teensy 3.2 is a direct, 100% compatible replacement ..

रo 1,730.00 रo 2,005.00

Micro USB OTG Cable - 4 Port

Micro USB OTG Cable - 4 Port

This is a multifunctional USB OTG Host Hub Adapter Cable. Compatible with all tablets and ce..

रo 440.00

Cable USB-A male to USB Micro-B male - Flat Noodle Type

Cable USB-A male to USB Micro-B male - Flat Noodle Type

Flat Nnoodle type USB-A male to USB Micro-B male cable. Length = Approx 1m Note: Color may v..

रo 240.00

Color 320x240 TFT Touchscreen, ILI9341 Controller Chip

Color 320x240 TFT Touchscreen, ILI9341 Controller Chip

This 320x240 color TFT display is recommended for use with Teensy 3.2, for high resolution color gra..

रo 2,152.00 रo 2,460.00

Prop Shield With Motion Sensor

Prop Shield With Motion Sensor

The Prop Shield is meant interactive light and sound effects on small handheld props and wearable co..

रo 2,331.00 रo 2,775.00

Prop Shield, Low Cost (no Motion Sensors)

Prop Shield, Low Cost (no Motion Sensors)

This Electret Condenser Microphone is meant to be used with the Teensy Audio Adaptor. It is PUI Audi..

रo 1,004.00 रo 1,195.00

Pre-programmed Bootloader Chip for DIY Teensy LC and 3.2 Projects

Pre-programmed Bootloader Chip for DIY Teensy LC and 3.2 Projects

By using this chip and a blank MKL26Z64VFT4 or MK20DX256VLH7, you can build your own Do-It-Yourself ..

रo 813.00 रo 929.00

WS2813B Digital RGB LED Flexi-Strip 30/ 60/ 144 LED - 1m

WS2813B Digital RGB LED Flexi-Strip 30/ 60/ 144 LED - 1m

  WS2813 is an upgraded version of WS2812. Single pixel control. Dual signal transmission, o..

रo 595.00

Pre-programmed ATMEGA32U4 Chip for DIY Teensy Projects

Pre-programmed ATMEGA32U4 Chip for DIY Teensy Projects

Pre-programmed ATMEGA32U4 Chip for DIY Teensy Projects For developing projects, we highly recomm..

रo 693.00 रo 792.00

Micro USB OTG Cable

Micro USB OTG Cable

Micro USB OTG Cable  ..

रo 35.00

WS2813B RGB LED with Integrated Driver Chip

WS2813B RGB LED with Integrated Driver Chip

  WS2813 is an upgraded version of WS2812. WS2813 is an intelligent control LED light source..

रo 18.00

LED Pixel Strip - SK9822

LED Pixel Strip - SK9822

  SK9822 IC based LED pixel Strip. Light source: SMD 5050 LED; sheet: FPCB; ..

रo 1,335.00

Teensy 4.0 Development Board

Teensy 4.0 Development Board

Teensy 4.0 is the latest Teensy, offering the fastest microcontroller and powerful peripherals in th..

रo 2,134.00 रo 2,540.00

Teensy 4.1 Development Board

Teensy 4.1 Development Board

Teensy 4.1 features the fastest micocontroller and an expanded set of powerful peripherals in a 2.4 ..

रo 2,655.00 रo 2,907.00

Nooelec Micropendous Android ADK Development Board

Nooelec Micropendous Android ADK Development Board

 Android ADK Compatiblity! Tested with a Google Nexus S and an LG Optimus One (P500). Will work..

रo 6,315.00

Tags: Teensy LC, PJRC, ARM, Cortex-M0

The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.

Name
Email
Phone
Comments