• You can now create a dazzling display with your Raspberry Pi with the Adafruit RGB Matrix Bonnet. These boards plug into your Pi and makes it super easy to control RGB matrices such as those we stock in the shop and create a colorful scrolling display or mini LED wall with ease.

    "Bonnet" boards work on any Raspberry Pi with a 40-pin GPIO header — Zero, Zero W/WH, Model A+, B+, Pi 2 and Pi 3. They do not work with older 26-pin boards like the original Model A or B. Note with the Pi Zero you may need to solder a header on the Pi board; it’s normally unpopulated on that model.

    We also have an older, HAT version of our RGB Matrix design. The HAT version does not come fully assembled, does not support 1/32-scan matrices, but does come with a real time clock (RTC)

    This bonnet will make your matrix projects super easy and avoids wiring complexity. Let me break it down for you:

    • Simple design - plug in power, plug in IDC cable, run our Python code!
    • Power protection circuitry - you can plug a 5V 4A wall adapter into the bonnet and it will automatically protect against negative, over or under-voltages! Yay for no accidental destruction of your setup.
    • Onboard level shifters to convert the RasPi's 3.3V to 5.0V logic for clean and glitch free matrix driving
    • Fully assembled compact design no soldering required! Plugs onto any Raspberry Pi with a 2x20 connector, and you're ready to glow.

    Works with any of our 16x32, 32x32 or 32x64 RGB LED Matrices with HUB75 connections. You can also use 64x64 matrices by soldering a small jumper on the PCB. Want more lights? No problem, chain multiple matrices together for a longer display - we've only tested up to 32x128 but it works just fine. The bigger the display the harder it is on the Pi, so keep that in mind if you're using a lower-powered Pi Zero.

    Please note: this Bonnet is only for use with HUB75 type RGB matrices. Not for use with NeoPixel, DotStar, or other 'addressable' LEDs.

    Each order comes with a fully assembled and ready to go bonnet with all parts assembled. RGB Matrix is not included, please check out our fine selection

    A 5V power supply is also required, not included, for power the matrix itself, the Pi cannot do it, to calculate the power, multiply the width of all the chained matrices * 0.12 Amps : A 32 pixel wide matrix can end up drawing 32*0.12 = 3.85A so pick up a 5V 4A power supplyWe also stock 5V 10A power supplies. Actual power usage will vary with how many LEDs you light up at once.

    Raspberry Pi not included (but we have 'em in the shop so pick one up, Zero, Model A+, B+, Pi 2 or Pi 3)

    We have a full guide tutorial with installation, software, datasheets, EagleCAD PCB files, Fritzing objects and more!

  • TECHNICAL DETAILS

    Datasheets, EagleCAD PCB files, and Fritzing available in the product tutorial

    Product Dimensions: 66.2mm x 30.7mm x 17.2mm / 2.6" x 1.2" x 0.7"

    Product Weight: 13.9g / 0.5oz

 

Write a review

Please login or register to review

Adafruit 3211 RGB Matrix Bonnet for Raspberry Pi

  • Brand: Adafruit
  • Product Code:Ada-RGB-Matrix-Bonnet
  • Reward Points:17
  • Availability:In Stock
  • रo 1,614.00

  • Price in reward points:1702

  • 50 or more रo 1,413.00
  • 100 or more रo 1,407.00

Related Products

Raspberry Pi 3 Model B

Raspberry Pi 3 Model B

Raspberry Pi 3 can run the full range of ARM GNU/Linux distributions, including Snappy Ubuntu Core, ..

रo 2,588.00

Raspberry Pi Zero

Raspberry Pi Zero

The new Raspberry Pi Zero is an super-ultra-low-cost, tiny-small-form-factor Raspberry Pi!  Feat..

रo 1,035.00

Raspberry Pi Zero W

Raspberry Pi Zero W

Raspberry Pi Zero W is a super-compact, hackable, and ultra-low cost computer, This is the version w..

रo 1,552.00

Adafruit 4767 Replacement 5V Power Cable for RGB LED Matrices

Adafruit 4767 Replacement 5V Power Cable for RGB LED Matrices

Here's a handy power cable for the RGB LED Matrix Panels we carry.Easily plug into the back of your ..

रo 240.00 रo 265.00

Adafruit 5778 Matrix Portal S3 CircuitPython Powered Internet Display

Adafruit 5778 Matrix Portal S3 CircuitPython Powered Internet Display

Folks love our wide selection of RGB matrices and accessories for making custom colorful LED display..

रo 2,155.00

Adafruit 5783 EYESPI Pi Beret - Buttons, EYESPI and STEMMA QT

Adafruit 5783 EYESPI Pi Beret - Buttons, EYESPI and STEMMA QT

Raspberry Pi's make for handy lil computers, but they're really wonderful when you can connect all s..

रo 534.00

Adafruit 3356 Animated Eyes Bonnet for Raspberry Pi Mini Kit - Without Displays

Adafruit 3356 Animated Eyes Bonnet for Raspberry Pi Mini Kit - Without Displays

The Snake Eyes Bonnet is a Raspberry Pi accessory for driving two 128x128 pixel OLED or TFT LCD disp..

रo 858.00

Adafruit 4506 1.3 Color TFT Bonnet for Raspberry Pi - 240x240 TFT + Joystick Add-on

Adafruit 4506 1.3 Color TFT Bonnet for Raspberry Pi - 240x240 TFT + Joystick Add-on

If you'd like a compact color display, with buttons and a joystick - we've got what you're looking f..

रo 1,889.00

Tags: Adafruit, RGB, Matrix, Bonnet, Raspberry Pi

The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.

Name
Email
Phone
Comments