4G HAT FOR RASPBERRY PI

Enabling LTE Cat-4 4G / 3G / 2G Communication & GNSS Positioning

Based on SIM7600G-H, Global Band

Features At A Glance:

  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
  • Supports dial-up, telephone call, SMS, TCP, UDP, DTMF, HTTP, FTP, etc.
  • Supports GPS, BeiDou, Glonass, GALILEO, QZSS, LBS base station positioning
  • Onboard USB interface, to test AT Commands, get GPS positioning data, and so on
  • Onboard CP2102 USB to UART converter, for serial debugging
  • Breakout UART control pins, to connect with host boards like Arduino/STM32
  • SIM card slot, supports 1.8V/3V SIM card
  • TF card slot for storing data like files, messages, etc.
  • Onboard audio jack and audio decoder for making telephone call
  • 2x LED indicators, easy to monitor the operating status
  • Onboard voltage translator, operating voltage can be configured to 3.3V or 5V via jumper
  • Baudrate: 300bps ~ 4Mbps (default: 115200bps)
  • Autobauding baudrate: 9600bps ~ 115200bps
  • Control via AT commands (3GPP TS 27.007, 27.005, and V.25TER command set)
  • Supports SIM application toolkit: SAT Class 3, GSM 11.14 Release 99, USAT
  • Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)

Specifications:

FREQUENCY BAND
LTE Cat-4LTE-FDD: B1/B2/B3/B4/B5/B7/B8/B12/B13/B18/B19/B20/B25/B26/B28/B66
LTE-TDD: B34/B38/B39/B40/B41
3GUMTS/HSDPA/HSPA+: B1/B2/B4/B5/B6/B8/B19
2GGSM/GPRS/EDGE: 850/900/1800/1900 MHz
GNSS
Satellite systemsGPS/Beidou/GLONASS/GALILEO/QZSS
Receiver type16-channel
C/A Code
Sensitivity-159 dBm (GPS) / -158 dBm (GLONASS) / TBD (BeiDou)
Cold starts: -148 dBm
Time-To-First-Fix (open air)Cold starts: <35s
Hot starts: <1s
SMS AND AUDIO
SMSSupported types: MT, MO, CB, Text, PDU
Storage: USIM card and ME (default)
Audio featureSupports echo cancellation
Supports noise reduction
OTHER
Power supply5V
Operating voltage5V / 3.3V (configured via jumper)
Operating temperature-30°C ~ 80°C
Storage temperature-45°C ~ 90°C
Dimensions56.21mm × 65.15mm

Standard Raspberry Pi 40PIN GPIO

Compatible With Raspberry Pi Series Boards, Jetson Nano

Global Band 4G / 3G / 2G Support

Dial-Up On Windows/Linux

  • LTE Cat-4: Up To 50Mbps (Uplink) / Up To 150Mbps (Downlink)
  • 3G (HSPA+): Up To 5.76Mbps (Uplink) / Up To 42Mbps (Downlink)

Cloud Communication

  • Supports Communication Protocols Including TCP/UDP/FTP/FTPS/HTTP/HTTPS

GNSS Positioning

  • Supports GPS, BeiDou, Glonass, GALILEO, QZSS, LBS Base Station Positioning

Telephone Call & SMS Support

  • Making Telephone Call Or Sending SMS By AT Commands, With Onboard Audio Jack



What's On Board

  1. SIM7600G-H
  2. CP2102 USB to UART converter
  3. NAU8810 audio decoder
  4. TXS0108EPWR voltage translator
    translates 3.3V/5V into 1.8V
  5. MP2128DT power chip
  6. SPX29302 power chip
  7. Raspberry Pi GPIO header
  8. SIM7600 control interface
    for connecting with host boards like Arduino/STM32
  9. SIM card slot
    supports 1.8V/3V SIM card
  10. TF card slot
    allows data storage like files, messages, etc.
  11. 3.5mm earphone/mic jack
  12. USB interface
    for testing AT Commands, getting GPS positioning data, etc.
  13. USB to UART interface
    for serial debugging, or login to Raspberry Pi

 

  1. MAIN antenna connector
  2. AUX antenna connector
  3. GNSS antenna connector
  4. Power switch
  5. Network status indicator
  6. Power indicator
  7. Operating voltage selection jumper
    configured via 0Ω resistor jumper
    VCCIO - 3.3V: set operating voltage as 3.3V
    VCCIO - 5V: set operating voltage as 5V
  8. UART selection jumper
    A: access Raspberry Pi via USB to UART
    B: control the SIM7600 by Raspberry Pi
    C: control the SIM7600 via USB to UART
  9. PWR configuration jumper
    PWR - 3V3: auto startup on power-up (default)
    PWR - D6: startup/shutdown by the Raspberry Pi D6 pin
    Flight mode configuration jumper
    NC by default, no flight mode control pin
    Flight - D4: flight mode is controlled by the Raspberry Pi D4 pin
  10. USB connector solder pads
  11. BOOT forced programming solder pads
Pinout Definition
Outline Dimensions
Documentations:
Package Includes:
  • 1 x SIM7600G-H 4G HAT
  • 1 x LTE Antenna
  • 1 x GPS External Antenna (B)
  • 2 x USB type A plug to micro plug cable
  • 1 x RPi screws pack (2pcs)

Write a review

Please login or register to review

Waveshare 17372 SIM7600G-H 4G HAT For Raspberry Pi, LTE Cat-4 4G / 3G / 2G Support, GNSS Positioning, Global Band

  • Brand: Waveshare Electronics
  • Product Code:NR-WaveS-17372-SIM7600G-H-4G-HAT
  • Reward Points:69
  • Availability:In Stock
  • रo 6,929.00
  • रo 5,820.00

  • Price in reward points:6929

  • 2 or more रo 6,873.00
  • 4 or more रo 6,818.00
  • 11 or more रo 6,762.00
  • 21 or more रo 6,707.00

Related Products

SIM7600G-H-M2 4G Communication Module

SIM7600G-H-M2 4G Communication Module

The SIM7600G-H-M2 is the LTE Cat 4 module that supports wireless communication modes of LTE-TDD, LTE..

रo 4,623.00 रo 5,503.00

Waveshare 23992/24011/24012/24013 SIM7600X 4G Communication Module, Multi-band Support, Compatible with 4G/3G/2G, With GNSS Positioning

Waveshare 23992/24011/24012/24013 SIM7600X 4G Communication Module, Multi-band Support, Compatible with 4G/3G/2G, With GNSS Positioning

SIM7600X 4G Communication Module, Multi-Band Support, Compatible With 4G/3G/2G, With GNSS Positionin..

रo 4,403.00 रo 5,240.00

Pimoroni Nano HAT Hacker

Pimoroni Nano HAT Hacker

The Black HAT Hacker in bijou form. It's Nano HAT Hacker (formerly known as Pico HAT Hacker)!Nano HA..

रo 237.00

Tags: Waveshare, SIM7600G-H, HAT, Raspberry Pi, GNSS

The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.

Name
Email
Phone
Comments