The JustBoom Digi HAT is a high-resolution digital audio output add-on board for the Raspberry Pi. Simply stack the plug-and-play add-on board (HAT) onto your Raspberry Pi A+, B+, 2B or the new 3B and it will be ready to use immediately. The JustBoom Digi HAT produces an unmodified, high quality, digital audio data stream for bit-perfect transmission to your HiFi system.

Just connect your Digi HAT to external DAC or amplifierplified speakers and you can be up and running quickly, enjoying flawless high-quality audio playback within minutes of setting up this Raspberry Pi HAT.

Includes a 192kHz/24 bit digital audio chip with low jitter, bit perfect digital output (S/PDIF) over optical or coaxial connectors for an uncompromised high-quality audio experience. The JustBoom Digi HAT includes an output transformer for full galvanic isolation between your Raspberry Pi and your DAC on the coaxial output.

The Raspberry Pi Digi HAT uses the I2S interface for its audio input which reduces CPU load on the Raspberry Pi compared to USB solutions. It is also powered directly from the GPIO header so no extra cables or power supplies are required to connect to the Raspberry Pi. All of the Raspberry Pi GPIO pins are still accessible on the Digi HAT for easy customisation of your project – add additional sensors, buttons, LEDs, rotary encoders or anything your heart desires.

product guide.png

Use cases.jpg

Pairing the Raspberry Pi with a high quality audio card provides the perfect solution for a number of exciting projects and applications where the standard on-board audio on the Raspberry Pi simply won’t cut it. Here are some possible use cases for the JustBoom DAC HAT and your Raspberry Pi computer:

•Circumstances where you need to have your streaming audio player (Raspberry Pi in this case) located separately from your amplifier or DAC. This method is usually superior to analog since the original digital signal is maintained until the amplification step (theoretically leading to less degradation of the sound).

•Streaming (either from cloud or network storage) high-definition audio player

•Multi-room audio player

•Surround sound for media centre / set-top box applications

•And many many more….

Features.jpg

•Dedicated S/PDIF output interface chip supports up to 192kHz / 24bit resolution

•Digital audio output over either optical (TOSLINK) or coaxial (RCA electrical) connectors

•Low jitter, bit perfect digital output

•Output transformer for galvanic isolation

•Plug and play compatibility for ease of use

•Software volume control from your Raspberry Pi

•No soldering required

•Powered by the Raspberry Pi GPIO header

•Compatible with Raspberry Pi  A+,B+, 2B and the new 3B 

•Mounting hardware included

•All Raspberry Pi GPIO pins still accessible via 40pin unpopulated extension header

•Our Raspberry Pi Digi is fully HAT compliant

•Full driver support in Raspbian / NOOBS

•Compatible with OSMC / RuneAudio / Volumio / Moode / PiCorePlayer / PiMusicBox / OpenELEC and others

Technical Information.jpg

•WM8804GEDS S/PDIF Transceiver with 24bit/192khz and has an integrated low jitter PLL (50ps RMS)

•DA101JC high bandwidth digital output transformer for galvanic isolation on electrical (coaxial/RCA) output

•Integrated EEPROM for automatic Raspberry Pi devicetree driver configuration and fully HAT compatible

•Digital signal output over S/PDIF with either optical (TOSLINK) or coaxial (RCA) connectors

•We recommend that if you are using the coaxial/RCA output that you connect the cable shield to the ground on the DAC / amplifier you are using and make sure that the DAC / Amplifier is using a power supply with the ground pin connected. This will help to reduce noise.

•Bit perfect digital audio transmission

•Optional Vishay TSOP4838 IR receiver included in package (solder yourself if required)

•While the hardware is able to output DTS/Dolby Digital, the Raspberry Pi software is not currently able to support this. Let us know if you want to implement this and we will do our best to help

Setup Guide

 

 

Write a review

Please login or register to review

JustBoom Digi HAT for the Raspberry Pi

  • Product Code:Seeed-Justboom-Digi-HAT
  • Reward Points:47
  • Availability:Out Of Stock
  • रo 4,652.00

  • Price in reward points:4652

  • 80 or more रo 3,881.00

Related Products

Raspberry Pi 3 Model B

Raspberry Pi 3 Model B

Raspberry Pi 3 can run the full range of ARM GNU/Linux distributions, including Snappy Ubuntu Core, ..

रo 2,588.00

BOSS DAC

BOSS DAC

We all live in a society obsessed by brand names and the latest gadget. Sometimes with reason someti..

रo 4,161.00

JustBoom Digi HAT for the Raspberry Pi

JustBoom Digi HAT for the Raspberry Pi

The JustBoom Digi HAT is a high-resolution digital audio output add-on board for the Raspberry Pi. S..

रo 4,652.00

JustBoom Amp HAT for the Raspberry Pi

JustBoom Amp HAT for the Raspberry Pi

The JustBoom Amp HAT is a high quality audio amplifier designed specifically for the Raspberry Pi. A..

रo 3,866.00

MINIBOSS FOR RPI ZERO

MINIBOSS FOR RPI ZERO

There are many DACs for RPI Zero. Most of them low-priced, carbon copy of datasheet, slave DACs. ..

रo 1,711.00

VoltaStream ZERO

VoltaStream ZERO

Tiny audio streaming module running Linux. High-Quality 192 kHz TI PCM5121 BurrBrown DAC ..

रo 5,725.00

Tags: Justboom, Digi, HAT, Raspberry, Pi

The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.

Name
Email
Phone
Comments