Adafruit DC & Stepper Motor HAT for Raspberry Pi -Mini Kit is perfect for any motion project as it can drive up to 4 DC or 2 Stepper motors with full PWM speed control.

 
Since the Raspberry Pi does not have a lot of PWM pins, we use a fully-dedicated PWM driver chip onboard to both control motor direction and speed. This chip handles all the motor and speed controls over I2C. Only two pins (SDA & SCL) are required to drive the multiple motors, and since it's I2C you can also connect any other I2C devices or HATs to the same pins.
 
In fact, you can even stack multiple Motor HATs, up to 32 of them, for controlling up to 64 stepper motors or 128 DC motors (or a mix of the two) - just remember to purchase and solder in a stacking header instead of the one we include.
 
Motors are controlled by TB6612 MOSFET drivers with 1.2A per channel current capability (you can draw up to 3A peak for approx 20ms at a time), a big improvement over L293D drivers and there are built-in flyback diodes as well.
 
We even had a little space so we added a polarity protection FET on the power pins and a bit of prototyping area. And the HAT is assembled and tested here at Adafruit so all you have to do is solder on the included 2x20 plain header and the terminal blocks.
 
Compatibility :  Works with any and all Raspberry Pi computers with 2x20 connection port.
 
 
 
Specification :
  • 4 H-Bridges: TB6612 chipset provides 1.2A per bridge with thermal shutdown protection, internal kickback protection diodes. Can run motors on 4.5VDC to 13.5VDC.
  • Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution)
  • Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, interleaved or micro-stepping.
  • Big terminal block connectors to easily hook up wires (18-26AWG) and power
  • Polarity protected 2-pin terminal block and jumper to connect external 5-12VDC power
  • Works best with Raspberry Pi model A+, B+, or Pi 2, but can be used with a model A or B if you purchase a 2x13 extra-tall header and solder that instead of the 2x20
  • Install the easy-to-use Python library, check out the examples and you're ready to go

Comes with an assembled & tested HAT, terminal blocks, and 2x20 plain header. Some soldering is required to assemble the headers on. Stacking header not included, but we sell them in the shop so if you want to stack HATs, please pick one up at the same time.

Raspberry Pi, motors, and battery pack are not included but we have lots of motors in the shop and all our DC motors, and stepper motors work great. Check out our detailed tutorial for tons of info including schematics, wiring diagrams, python libraries and example walkthroughs.
 
Note: The terminal blocks included with your product may be blue or black. Raspberry Pi and motors are not included.
 
 
Package Contents :
  •  65mm x 56mm x 13mm / 2.6" x 2.2" x 0.5"
  • 2x20 plain header
  • 1 x Stepper Motor HAT

 

Write a review

Please login or register to review

Adafruit 2348 DC and Stepper Motor HAT for Raspberry Pi - Mini Kit

  • Brand: Adafruit
  • Product Code:Ada-2348-DC-Stepper-Motor-HAT
  • Reward Points:26
  • Availability:In Stock
  • रo 2,428.00

  • Price in reward points:2562

  • 50 or more रo 2,125.00
  • 60 or more रo 2,116.00

Related Products

Raspberry Pi Compute Module

Raspberry Pi Compute Module

The Raspberry Pi Compute Module is Raspberry Pi's new product specifically designed for makers who w..

रo 5,070.00

Raspberry Pi Zero

Raspberry Pi Zero

The new Raspberry Pi Zero is an super-ultra-low-cost, tiny-small-form-factor Raspberry Pi!  Feat..

रo 1,035.00

Raspberry Pi 3 Model B+

Raspberry Pi 3 Model B+

The Raspberry Pi 3 Model B+ is the latest product in the Raspberry Pi 3 range. Broadcom BCM2..

रo 3,300.00

Raspberry Pi 4 Model B

Raspberry Pi 4 Model B

Raspberry Pi 4 Model B is the latest product in the popular Raspberry Pi range of computers. It offe..

रo 3,960.00

Adafruit 2324 Ultimate GPS HAT for Raspberry Pi A+/B+/Pi 2/3/Pi 4 - Mini Kit

Adafruit 2324 Ultimate GPS HAT for Raspberry Pi A+/B+/Pi 2/3/Pi 4 - Mini Kit

It's 10PM, do you know where your Raspberry Pi is? If you had this GPS HAT, you would! This new HAT ..

रo 3,232.00

Adafruit 3190 DRV8871 DC Motor Driver Breakout Board - 3.6A Max

Adafruit 3190 DRV8871 DC Motor Driver Breakout Board - 3.6A Max

Crank up your robotics with powerful Adafruit DRV8871 motor driver breakout board. This motor driver..

रo 717.00 रo 809.00

Adafruit 2448 TB6612 1.2A DC/Stepper Motor Driver Breakout Board

Adafruit 2448 TB6612 1.2A DC/Stepper Motor Driver Breakout Board

Spin two DC motors, step one bi-polar or uni-polar stepper, or fire off two solenoids with 1.2A per ..

रo 665.00 रo 750.00

Adafruit 3297 DRV8833 DC/Stepper Motor Driver Breakout Board

Adafruit 3297 DRV8833 DC/Stepper Motor Driver Breakout Board

Spin two DC motors or step one bi-polar or uni-polar stepper with up to 1.2A per channel using the D..

रo 569.00 रo 642.00

Tags: Adafruit, Stepper, Motor, HAT, RaspberryPi

The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.

Name
Email
Phone
Comments