• The Raspberry Pi is a wonderful little computer, but one thing it isn't very good at is controlling Servo Motors - these motors need very specific and repetitive timing pulses to set the position. Instead of asking the Pi Linux kernel to send these signals, pop on this handy bonnet! It adds the capability to control 16 Servos with perfect timing. It can also do PWM up to 1.6 KHz with 12 bit precision, all completely free-running.

    For use with Raspberry Pi Model Zero, A+, B+, Pi 2 or Pi 3 (any Pi with 2x20 header) This bonnet will not fit on an original Raspberry Pi with 2x13 pin header.

    The Adafruit 16-Channel 12-bit PWM/Servo Bonnet will drive up to 16 servos or PWM outputs over I2C with only 2 pins. The on-board PWM controller will drive all 16 channels simultaneously with no additional Raspberry Pi processing overhead. What's more, you can stack up to 62 of them to control up to 992 servos - all with the same 2 pins!

    Works with any servo that can be powered by 5V and take 3.3V logic level signals. There's a solder jumper you can adjust if you'd like to change the output logic level to be 5V

    Best of all, we even have a Python library you can use, so you'll be up and running instantly, to make your robotic creation come to life. The Adafruit PWM/Servo Bonnet is the perfect solution for any project that requires a lot of servos or PWM outputs! Please check out our detailed tutorial for lots more information including diagrams, schematics, installation instructions and more

    Each order comes with a Servo Bonnet, a 2-pin terminal block, 2.1mm DC jack, and four 3x4 headers. You'll need to do some light through-hole soldering to attach the terminal block or jack, and headers onto the bonnet circuit board, but its easy to do with basic soldering tools like a soldering iron and rosin core electronics solder. If you would like to stack multiple bonnets onto one Pi, you can also pick up a 2x20 stacking header and a set of right-angle 3x4 headers that should be soldered on instead.

    Please note! This kit does not come with Raspberry Pi, servos, or required 5V power supply.We have recommendations on the required 5-6V power supply on the tutorial page, any 3-pin classic DC hobby servo will work. The terminal block included with your product may be blue or black.

  • TECHNICAL DETAILS

    • Board Dimensions (w/o components): 65mm x 30.4mm x 8mm / 2.5" x 1.19" x 0.31"
      • 8.5g / .29oz

 

Write a review

Please login or register to review

Adafruit 3416 16-Channel PWM / Servo Bonnet for Raspberry Pi

  • Brand: Adafruit
  • Product Code:Ada-16-Channel-PWM-Servo-Bonnet-RPi
  • Reward Points:11
  • Availability:In Stock
  • रo 1,074.00

  • Price in reward points:1133

  • 50 or more रo 940.00
  • 145 or more रo 936.00

Related Products

Adafruit 815 16-Channel 12-bit PWM/Servo Driver - I2C interface - PCA9685

Adafruit 815 16-Channel 12-bit PWM/Servo Driver - I2C interface - PCA9685

Adafruit 16-Channel 12-bit PWM/Servo Driver You want to make a cool robot, maybe a hexapod wal..

रo 1,614.00

Adafruit 3416 16-Channel PWM / Servo Bonnet for Raspberry Pi

Adafruit 3416 16-Channel PWM / Servo Bonnet for Raspberry Pi

The Raspberry Pi is a wonderful little computer, but one thing it isn't very good at is controlling ..

रo 1,074.00

2.3KG Serial Bus Servo (6V)

2.3KG Serial Bus Servo (6V)

This is a miniature servo that can be connected in series, which can be controlled individually or i..

रo 1,423.00 रo 1,639.00

Waterproof Servo High Torque 35KGf / 45KGf

Waterproof Servo High Torque 35KGf / 45KGf

This waterproof high-torque servo comes with all-metal gear and an aluminum shell, which makes it st..

रo 2,977.00 रo 3,430.00

Adafruit 1455 12-Channel 16-bit PWM LED Driver - SPI Interface - TLC59711

Adafruit 1455 12-Channel 16-bit PWM LED Driver - SPI Interface - TLC59711

For all of you out there who want to control 12 channels of PWM, we salute you! We also would like y..

रo 809.00

Adafruit 3356 Animated Eyes Bonnet for Raspberry Pi Mini Kit - Without Displays

Adafruit 3356 Animated Eyes Bonnet for Raspberry Pi Mini Kit - Without Displays

The Snake Eyes Bonnet is a Raspberry Pi accessory for driving two 128x128 pixel OLED or TFT LCD disp..

रo 858.00

Adafruit 5963 555 PWM Output STEMMA - 1.4K~25 KHz or 1.4~250 Hz - STEMMA JST PH 2mm

Adafruit 5963 555 PWM Output STEMMA - 1.4K~25 KHz or 1.4~250 Hz - STEMMA JST PH 2mm

How many times have we heard "hey you could have just replaced that microcontroller with a 555"? May..

रo 426.00

Tags: Adafruit, 16-Channel, PWM, Servo, Bonnet, RPi

The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.

Name
Email
Phone
Comments