WIFI6 Dual ETH Base Board/Mini-Computer Designed For Raspberry Pi Compute Module 4(NOT Included), Onboard M.2 E KEY Slot

CM4-DUAL-ETH-WIFI6-BASE, the IO board of the Raspberry Pi Compute Module 4, is a carrier board that can be used with the Raspberry Pi Compute Module 4 and supports 7~12V DC power supply, and the board has three USB ports 2.0, WIFI6, dual Ethernet ports, suitable for soft routing and other scenarios that require multiple Ethernet ports.

Specifications:

  • CM4 SOCKET: suitable for all variants of Compute Module 4
  • NETWORKING: Gigabit Ethernet RJ45 connector × 1; 100M Ethernet RJ45 connector × 1
  • USB: USB 2.0 port × 3
  • PCIE: M.2 E KEY
  • PIN HEADER: 40PIN GPIO header × 1
  • DSI DISPLAY: MIPI DSI display port × 1, 15pin 1.0mm FPC connector
  • CSI CAMERA: MIPI CSI-2 camera port × 2, 15pin 1.0mm FPC connector
  • HDMI: HDMI × 2, support 4K 30fps output
  • RTC: Real-time clock with battery socket and ability to wake Compute Module 4
  • TF CARD SLOT: TF card socket for Compute Module 4 Lite (without eMMC) variants
  • POWER INPUT: 7V-36V
  • DIMENSIONS: 109.0 × 91.5mm

Onboard Resources:

CM4-DUAL-ETH-WIFI6-BASE Spec03.jpg

CM4-DUAL-ETH-WIFI6-BASE Spec04.jpg

Label Name Description
1 CM4 connector for all versions of Compute Module 4
2 40PIN GPIO header easy to connect various HAT modules
3 RJ45 Gigabit Ethernet port RJ45 Gigabit Ethernet port, support 10/100/1000M network access
ETHERNET 0: CM4 original network port
ETHERNET 1: USB expansion network port
4 RJ45 100M Ethernet port RJ45 100M Ethernet port, support 10/100 network access
ETHERNET 0: CM4 original network port
ETHERNET 1: USB expansion network port
5 USB 2.0 ports 3-way USB 2.0 ports, supporting various USB devices
6 M.2 connector M.2 E KEY slot, support 2230 and 2240
7 HDMI port Dual HDMI port, support dual 4K 30fps output
8 RTC battery connector can be connected to CR1220 button battery
9 CAM port Dual MIPI CSI camera port
10 DC power header 7~36V DC wide voltage power supply
11 Double LEDs holder Red light: Raspberry Pi power indicator
Green light: Raspberry Pi working status indicator
12 Micro SD card slot It is used to insert the Micro SD card with the system to start Compute Module 4 Lite
13 FAN header Easy access to the cooling fan, support speed adjustment and measurement
14 DISP1 port MIPI DSI display port, DISP1 port
15 USB SLAVE port Compute Module 4 eMMC version can program the system image by this port
16 100M Ethernet port chip RTL8152 100M network port chip
17 USB HUB USB 2.0 HUB chip
18 System function switching BT_DIS: Disable Bluetooth, only for CM4 version with antenna
WiFi_DIS: Disable WiFi, only for CM4 version with antenna
WP_DIS: Prevent EEPROM from being rewritten
19 IO-VREF selection CM4 IO logic voltage switching 3.3V or 1.8V
20 FAN Power Supply Selection Optional 5V or 12V voltage to drive the fan
21 RTC interrupt pin switch PI-RUN: RTC trigger interrupt CM4 restart
GN-EN: RTC trigger interrupt CM4 power off
D4: RTC trigger interrupt D4 pin
22 RTC/FAN I2C bus selection SDA0/SCL0: shared by I2C-10 and CSI/DSI
GPIO3/2: shared by I2C-1 and 40PIN

Note

  • 1. Do not unplug any device except USB and HDMI when the power is on.
  • 2. Check the fan voltage before connecting. It supports 5V and 12V. The default connection is 12V. Before switching, please modify the resistance of FAN_VCC.
  • 3. The Type C interface is only used as a USB SLAVE interface to burn images, and cannot be used as a power supply.
  • 4. When CM4 is in normal use, it needs to provide at least a 12V 1.5A power supply. Otherwise, problems such as automatic shutdown and frequency reduction may occur.
  • 5. See instructions for use about Opwenwrt.
  • 6. This expansion board does not support the POE function.

Package Includes:

  • CM4-DUAL-ETH-WIFI6-BASE
    • 1 x CM4-DUAL-ETH-WIFI6-BASE 


  • CM4-DUAL-ETH-WIFI6-BOX
    • 1 x CM4-DUAL-ETH-WIFI6-BASE 
    • 1 x Metal case (top and bottom) 
    • 1 x Fan-4010-PWM-5V 
    • 1 x OPTIONS12V 2A P


Write a review

Please login or register to review

Waveshare 23589/23591/23808 WIFI6 Dual ETH Base Board/Mini-Computer Designed for Raspberry Pi Compute Module 4(NOT Included), Onboard M.2 E KEY Slot

  • Brand: Waveshare Electronics
  • Product Code:WaveS-WIFI6-Dual-ETH-Base-Board
  • Reward Points:41
  • Availability:In Stock
  • रo 4,140.00
  • रo 3,485.00

  • Price in reward points:4140

  • 4 or more रo 4,105.00
  • 7 or more रo 4,075.00
  • 10 or more रo 3,990.00
  • 18 or more रo 3,955.00
  • 35 or more रo 3,925.00

Available Options


Related Products

Waveshare 23451 Nano Base Board (C) with 8MP Camera for Raspberry Pi Compute Module 4

Waveshare 23451 Nano Base Board (C) with 8MP Camera for Raspberry Pi Compute Module 4

                          Nano Base..

रo 2,480.00 रo 2,955.00

Waveshare 19838 / 20203 / 20225 Dual Gigabit Ethernet Base Board Designed for Raspberry Pi Compute Module 4

Waveshare 19838 / 20203 / 20225 Dual Gigabit Ethernet Base Board Designed for Raspberry Pi Compute Module 4

CM4-DUAL-ETH-BASE is a base board that can be used with Raspberry Pi Compute Module 4, and supports ..

रo 4,293.00 रo 5,111.00

Waveshare 23228 / 23926 Mini Base Board (C) / Mini-Computer Advanced Designed for Raspberry Pi Compute Module 4

Waveshare 23228 / 23926 Mini Base Board (C) / Mini-Computer Advanced Designed for Raspberry Pi Compute Module 4

Mini Base Board/Mini-Computer Advanced Version, Designed For Raspberry Pi Compute Module 4Mini Base ..

रo 1,786.00 रo 2,126.00

Tags: Waveshare, Dual ETH, Raspberry Pi, Compute Module

The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.

Name
Email
Phone
Comments