• Adafruit 862 GPIO Ribbon Cable for Raspberry Pi Model A and B - 26 pin
That new Raspberry Pi® Model A or B computer you just got has a row of 2x13 pin headers soldered on - those are the GPIO (general purpose input/output) pins and for those of us who like to hack electronics they are where the real fun is. By programming the Pi, you can twiddle those pins high or low, send and receive I2C and SPI data, and access the 3V and 5V power rails. This cable is not compatible with the Raspberry Pi Model B+
 
If you want to bridge those contacts out onto another PCB, you'll want this cable! It's 6" long and has 26 socket & wire sets. Pin #1 is marked with a white wire. If you have one of our nice Pi Box cases, you can even have this plugged in while the case is closed by passing the ribbon cable through the slot on the side.
 
What is the Raspberry Pi® ? A low-cost ARM GNU/Linux box.
 
The Raspberry Pi® is a single-board computer developed in the UK by the Raspberry Pi Foundation with the intention of stimulating the teaching of basic computer science in schools. The design is based on a Broadcom BCM2835 system on a chip (SoC), which includes an ARM1176JZF-S 700 MHz processor, VideoCore IV GPU, and 256 megabytes of RAM. The design does not include a built-in hard disk or solid-state drive, instead relying on an SD card for booting and long-term storage. The Foundation plans to support Fedora Linux as the initial system software package/distribution, with support for Debian and Arch Linux as well 

Write a review

Please login or register to review

Adafruit 862 GPIO Ribbon Cable for Raspberry Pi Model A and B - 26 pin

  • Brand: Adafruit
  • Product Code:Ada-RPi-GPIO-Ribbon-26-Pin
  • Reward Points:3
  • Availability:In Stock
  • रo 318.00

  • Price in reward points:336

  • 50 or more रo 279.00
  • 480 or more रo 278.00

Related Products

Raspberry Pi 3 Model B

Raspberry Pi 3 Model B

Raspberry Pi 3 can run the full range of ARM GNU/Linux distributions, including Snappy Ubuntu Core, ..

रo 2,588.00

GPIO Expansion Kit for Raspberry Pi - 40 Pin

GPIO Expansion Kit for Raspberry Pi - 40 Pin

This is the assembled version of the Pi T-Cobbler Plus.  It only works with the Raspberry Pi Model Z..

रo 155.00 रo 400.00

Adafruit 1646 Flex Cable for Raspberry Pi Camera or Display - 100mm / 4"

Adafruit 1646 Flex Cable for Raspberry Pi Camera or Display - 100mm / 4"

This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either ..

रo 210.00

Adafruit 178 Linear SoftPot  (Ribbon Sensor) - 100mm

Adafruit 178 Linear SoftPot (Ribbon Sensor) - 100mm

Manufactured by Spectra Symbol, these are nice little ribbon controllers (also known as 'soft potent..

रo 858.00

Adafruit 5294 GPIO Ribbon Cable 2x10 IDC Cable - 20 pins 12inch long

Adafruit 5294 GPIO Ribbon Cable 2x10 IDC Cable - 20 pins 12inch long

Connect this to that! If you want to bridge those contacts out onto another PCB, you'll want this GP..

रo 210.00

Tags: Raspberry, Pi, Ribbon, Cable, GPIO, Breakout

The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.

Name
Email
Phone
Comments