Oh boy, this is a Big. Damn. Switch. Program it to switch loads up to 40V / 10A connected to the HT0740 breakout's sturdy screw terminals, and use up to four breakouts at the same time using the configurable I2C addresses. Great for home automation.

This fully-isolated, I2C-controllable switch can switch big loads up to 40V at 10A. There are sturdy screw terminals to connect your switched load to, and a handy little white status LED to give you visual feedback. Because we've used an I2C expander, you can use up to four of these at once, by configuring the addresses with the cuttable traces on the back of the board.

The HT0740 breakout has an I2C interface and is 3.3V or 5V compatible. Like our other Pimoroni breakouts, we've designed it so that you can solder a piece of right-angle header onto it and then pop it straight onto the bottom left 5 pins on your Raspberry Pi's GPIO header (pins 1, 3, 5, 6, 9).

It's also compatible with our fancy Breakout Garden, where using breakouts is as easy as just popping it into one of the six slots and starting to grow your project, create, and code.

Features:

  • HT0740 MOSFET driver chip (datasheet)
  • TCA9554A I2C expander chip (datasheet)
  • TPN2R304PL MOSFET (datasheet)
  • Bright white status LED
  • Can switch up to 40V / 10A (DC only)
  • Fully-isolated
  • Screw terminals
  • 3.3V or 5V compatible
  • I2C interface (four addresses: 0x38-0x3B)
  • Reverse polarity protection (on the Breakout Garden side only)
  • Raspberry Pi-compatible pinout (pins 1, 3, 5, 7, 9)
  • Compatible with all 40-pin Raspberry Pi models
  • Compatible with Arduino
  • Python library

Software

We've put together a Python library that you can use with your HT0740 Breakout.

Our HT0740 Python library allows you to switch and toggle the switch on and off, check the state of the switch, and control the status LED, as well as controlling several switches at once, each with a different I2C address.

Notes:

  • DC voltage only. Do not use to switch loads higher than 40V / 10A. Despite the MOSFET part being rated for higher currents, the screw terminals are not suitable for this.
  • Not PWM-able
  • Dimensions: 23x21x12mm

Package Includes:

  • 1 x HT0740 Breakout
  • 1 x 5 male header
  • 1 x 5 female right angle header

Write a review

Please login or register to review

Pimoroni HT0740 40V / 10A Switch Breakout

  • Brand: Pimoroni
  • Product Code:NR-PIM-HT0740
  • Reward Points:22
  • Availability:In Stock
  • रo 2,220.00

  • Price in reward points:2220

  • 5 or more रo 1,827.00
  • 10 or more रo 1,553.00
  • 19 or more रo 1,540.00
  • 48 or more रo 1,528.00
  • 95 or more रo 1,515.00

Related Products

Pimoroni Trackball Breakout

Pimoroni Trackball Breakout

A tiny, RGBW-illuminated, clickable Trackball Breakout that's perfect for adding navigation or contr..

रo 2,409.00

Pimoroni ADS1015 +/-24V ADC breakout

Pimoroni ADS1015 +/-24V ADC breakout

This ADS1015 ADC (analog-to-digital converter) breakout has three channels that can read voltages fr..

रo 2,078.00

Pimoroni Breakout Garden Mini (I2C + SPI)

Pimoroni Breakout Garden Mini (I2C + SPI)

Now with SPI! The easiest way to use breakouts with your Raspberry Pi. There's no soldering required..

रo 1,428.00 रo 1,701.00

Pimoroni Breakout Garden for Raspberry Pi (I2C)

Pimoroni Breakout Garden for Raspberry Pi (I2C)

Grow your projects on Breakout Garden. It's the easiest way to use breakouts with your Raspberry Pi...

रo 2,078.00

Pimoroni Breakout Garden for Raspberry Pi (I2C + SPI)

Pimoroni Breakout Garden for Raspberry Pi (I2C + SPI)

Now with SPI! Grow your projects on Breakout Garden. It's the easiest way to use breakouts with your..

रo 2,220.00

Tags: Pimoroni, Switch, Breakout

The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.

Name
Email
Phone
Comments