The G01 is the GPy OEM module. It’s just like the GPy except it’s been whittled down a little  to make it easy to integrate. Triple network module: Cellular LTE-CAT M1/NB1, WiFi and Bluetooth.

Features:
  • Powerful CPU
  • 1KM Wifi Range
  • MicroPython enabled
  • Fits on the Pycom OEM Reference Board.
  • Ultra-low power usage: a fraction compared to other connected micro controllers

Cellular Operating Frequencies:

  • 34 bands supported from 699Mhz to 2690Mhz (Total world-wide support)
  • Bands supported are currently: 1, 2, 3, 4, 5, 8, 12, 13, 14, 17, 18, 19, 20, 25, 26, 28, 66
Cellular Specification:
  • One single chip for both CAT M1 and NB1 (yes, only one chip)
  • 3GPP release 13 LTE Advanced Pro
  • Supports narrowband LTE UE categories M1/NB1
  • Integrated baseband, RF, RAM memory and power management
  • Reduced Tx power class option
  • Peak power estimations: TX current = 420mA peak @1.5Watt RX current = 330mA peak @1.2Watt
  • Data rates:
    • 300 kbps DL
    • 375 kbps UL (LTE Cat M1 in 1.4 Mhz, HD-FDD)
    • 40 kbps DL
    • 55 kbps UL (LTE Cat M2 in 200 kHz, HD-FDD)
Tx/Rx Frequencies:

Ports for LTE Bands
   Tx frequencies                                                                                  Rx frequencies
Low bands 5, 8, 12, 13, 14, 17, 18, 19, 20, 26, 28
 699 to 915 MHz                729 to 960 MHz
Mid bands 1, 2, 3, 4, 25, 66
1710 to 1980MHz                                                                                      
 1805 to 2170 MHz
 Interfaces:
  • 2 x UART, 2 x SPI, I2C, I2S, micro SD card
  • Analog channels: 8×12 bit ADCs, 2×8 bit DAC
  • Timers: 2×64 bit with PWM with up to 16 channels
  • DMA on all peripherals
Power:
  • Voltage Input: 3.3V regulated
Processing:
  • Espressif ESP32 SoC
  • Dual processor WiFi radio System on Chip.
  • Network processor handles the WiFi connectivity and the IPv6 stack
  • Main processor is entirely free to run the user application
  • An extra ULP-coprocessor that can monitor GPIOs, the ADC channels and control most of the internal peripherals during deep-sleep mode while only consuming 25uA
Security & Certifications:
  • SSL/TLS support up to 1.2
  • WPA Enterprise security
  • AES encryption engine
Memory:
  • RAM: 4MB
  • Flash Memory: 8MB
  • GPIO: Up to 22
  • Hardware floating point acceleration
  • Python multi-threading
  • Hash / encryption
  • SHA, MD5, DES, AES
WiFi Networking:
  • 802.11b/g/n 16mbps
Bluetooth:
  • Low energy and classic
RTC:
  • Running at 32KHz.

Package Includes:

  • 1 x G01 OEM Module

Write a review

Please login or register to review

G01 OEM Module

  • Brand: Pycom
  • Product Code:Pycom-G01-OEM-Module
  • Reward Points:58
  • Availability:Back-order
  • रo 5,552.00

  • Price in reward points:5784

  • 2 or more रo 5,529.00
  • 5 or more रo 5,506.00
  • 12 or more रo 5,483.00
  • 25 or more रo 5,460.00

Related Products

GPy

GPy

Note: This is to preorder for shipping May 2017 Get on with a board that gets you into the new..

रo 6,611.00

W01 OEM Module

W01 OEM Module

The W01 is the WiPy OEM module. It’s going to work exactly like your WiPy but we’ve trimmed a few bi..

रo 1,571.00

OEM Reference Board

OEM Reference Board

Reference Board used to mount either Pycom OEM modules. Provides the same functionality and pin-out ..

रo 2,042.00

L01 OEM Module

L01 OEM Module

The L01 is the LoPy OEM module. It works just like the LoPy but we’ve trimmed a few bits to make it ..

रo 2,997.00

L04 OEM Module

L04 OEM Module

The L04 is the LoPy4 OEM module. It works just like the LoPy4 but we’ve trimmed a few bits to make i..

रo 3,629.00

Tags: PyCom, OEM, Module

The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.

Name
Email
Phone
Comments