• GPy
  • Note: This is to preorder for shipping May 2017
Get on with a board that gets you into the newly available LTE-M networks. The GPy gives you full flexibility during testing, install, deployment and is delivered RCM, IC, CE and FCC certified.
 
With WiFi, BLE and cellular LTE CAT M1/NB1, the GPy is the latest Pycom triple-bearer MicroPython enabled micro controller on the market today – the perfect enterprise grade IoT platform for your connected Things. Create and connect your things everywhere, fast.
 
PLEASE NOTE: Pycom modules are powered by the NEW and FEATURE PACKED Espressif ESP32 chip. As a result our firmware is evolving constantly as the ESP32 IDF matures. Regular firmware updates are therefore provided.
 
GPy Features: 

– Powerful CPU
– 1KM WiFi range
– MicroPython enabled
– Fits in a standard breadboard (with headers)
– Ultra-low power usage: fraction compared to other connected microcontrollers
 
LTE-M Operating Frequencies
 
– 34 bands supported from 699Mhz to 2690Mhz (Total world-wide support)

LTE-M Specification
 
– One single chip for both CAT M1 and NB1
– 3GPP release 13 LTE Advanced Pro
– Supports narrowband LTE UE categories M1/NB1
– Integrated baseband, RF, RAM memory and power management
– Reduced Tx power class option
– Peak power estimations: TX current = 420mA peak @1.5Watt RX current = 330mA peak @1.2Watt
– Data rates:
– 300kbps DL
– 375 kbps UL (LTE Cat M1 in 1.4Mhz in 1.4 Mhz, HD-FDD)
– 40 kbps DL
– 55kbps UL (LTE Cat M2 in 200 kHz, HD-FDD)
 
Interfaces
 
– 2 x UART, 2 x SPI, I2C, I2S micro SD card
– Analog channels: 8×12 bit ADCs, 2×8 bit DAC
– Timers: 2×64 bit with PWM with up to 16 channels
– DMA on all peripherals
 
Power
– Voltage Input: 3.3V – 5.5V
– 3v3 output capable of sourcing up to 400mA

Processing
– Espressif ESP32 SoC
– Dual processor + WiFi radio system on chip
– Network processor handles the WiFi connectivity and the IPv6 stack
– Main processor is entirely free to run the user application
– An extra ULP-coprocessor that can monitor GPIOs, the ADC channels and control most of the internal peripherals during deep-sleep mode while only consuming 25uA
 
Security & Certifications
– SSL/TLS support up to 1.2
– WPA Enterprise security
– AES encryption engine
 
Memory
 
– RAM: 4MB
– Flash Memory: 8MB
– GPIO: Up to 22
– Hardware floating point acceleration
– Python multi-threading
 
Hash / Encryption
  • SHA, MD5, DES, AES
WiFi Networking
  • 802.11b/g/n 16mbps
Bluetooth
  • Low energy and classic
RTC
  • Running at 32KHz
Size
  • 55mm x 20mm x 3.5mm (Without Headers)
Weight
– 7g
– 31g

Write a review

Please login or register to review

GPy

  • Product Code:Pycom-GPy-Board
  • Reward Points:69
  • Availability:In Stock
  • रo 6,611.00

  • Price in reward points:6887

  • 2 or more रo 6,583.00
  • 4 or more रo 6,556.00
  • 10 or more रo 6,528.00
  • 20 or more रo 6,501.00

Related Products

RedBearLab CC3200 WiFi board

RedBearLab CC3200 WiFi board

RedBearLab CC3200 WiFi board, is based on CC3200 module that is provided by Texas Instruments (TI). ..

रo 2,585.00 रo 3,985.00

WiPy 2.0

WiPy 2.0

Introducing the WiPy 2.0. The tiny Micro Python enabled WiFi & Bluetooth IoT development platfor..

रo 3,010.00

Expansion Board 2.0 for WiPy 2.0, LoPy, SiPy, FiPy and GPy

Expansion Board 2.0 for WiPy 2.0, LoPy, SiPy, FiPy and GPy

Introducing the Expansion Board 2.0, compatible with the WiPy 2.0, LoPy, SiPy, FiPy and GPy.   ..

रo 1,795.00 रo 1,985.00

PyCase

PyCase

PyCase is a new transparent case that will be able to hold either LoPy or WiPy and expansion board. ..

रo 1,093.00

SiPy

SiPy

The SiPy is a multi-network (Sigfox, WiFi and BLE) development platform. It is programmable with Mic..

रo 3,385.00 रo 4,641.00

FiPy - IoT development board

FiPy - IoT development board

Imagine 5 networks in one perfectly-formed, same-small-foot-print-as-WiPy- LoPy-and SiPy, IoT develo..

रo 6,972.00

LTE-M Antenna Kit

LTE-M Antenna Kit

LTE-M Antenna Kit   LTE-M cellular network antenna for use with the FiPy and GPy develo..

रo 1,230.00

Pytrack

Pytrack

Imagine a sensor shield which you can use with any of your Pycom multi-network modules! This is what..

रo 5,466.00

Pysense

Pysense

Imagine a sensor shield which you can use with any of your Pycom multi-network modules. This is what..

रo 3,593.00

PyCom GPy - WiFi, Bluetooth LE and LTE-M

PyCom GPy - WiFi, Bluetooth LE and LTE-M

With WiFi, BLE and cellular LTE CAT M1/NB1, the Pycom GPy is a triple-bearer MicroPython e..

रo 6,612.00

LoPy4

LoPy4

The LoPy4 is a compact quadruple network MicroPython enabled development board (LoRa, Sigfox, WiFi, ..

रo 5,252.00

G01 OEM Module

G01 OEM Module

The G01 is the GPy OEM module. It’s just like the GPy except it’s been whittled down a little  ..

रo 5,552.00

Expansion Board 3.0 / 3.1

Expansion Board 3.0 / 3.1

The Expansion Board 3.0 is compatible with the WiPy 3.0,  LoPy4, SiPy, FiPy and GPy. Featur..

रo 2,403.00

Pysense 2.0 X

Pysense 2.0 X

Pysense 2.0 X is a 2nd Generation sensor shield which can be used with any Pycom multi-network modul..

रo 4,051.00

Pygate Case

Pygate Case

Pygate is Pycom’s new super low-cost 8-channel LoRaWAN gateway that comes in the shape of a shield a..

रo 1,359.00

Tags: GPy, tiny, Micro, Python

The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.

Name
Email
Phone
Comments