• FiPy - IoT development board
Imagine 5 networks in one perfectly-formed, same-small-foot-print-as-WiPy- LoPy-and SiPy, IoT development board. MicroPython enabled. Featuring WiFi, Bluetooth, LoRa, Sigfox and dual LTE-M (CAT M1 and NBIoT) the FiPy gives access to all the world’s LPWAN networks on one tiny board.
 
Get on with a board that gives you full flexibility during testing, install, deployment and even later when you want to switch real-time your airtime network provider. You can switch when the time is right for you or set some parameters that will do so automatically.
 
PLEASE NOTE: Pycom modules are powered by the NEW and FEATURE PACKED Espressif ESP32 chip. As a result our firmware is evolving constantly as the ESP32 IDF matures. Regular firmware updates are therefore provided.
 
FiPy Features : 
 
Powerful CPu
– Five networks: WiFi, BLE, cellular LTE-CAT M1/NB1, LoRa and Sigfox
– 1KM WiFi range
– MicroPython enabled
– Fits in a standard breadboard (with headers)
– Ultra-low power usage: a fraction compared to other connected microcontrollers
 
Processing :
 
Espressif ESP32 SoC
– Dual processor and WiFi radio system on chip
– Networking processor handles the WiFi connectivity and the IPv6 stack
– Main processor is entirely free to run the user application
– An extra ULP-coprocessor that can monitor GPIOs, the ADC channels and control most of the internal peripherals during deep-sleep mode while only consuming 25uA
 
Interfaces :
– 2 x UART, 2 x SPI, I2C, micro SD card
– ANalog channels: 8×12 bit ADCs, 2×8 bit DAC
– Timers: 2×64 bit with PWM with up to 16 channels
– DMA on all peripherals
– GPIO: Up to 22
 
Hash / Encryption :
SHA, MD5, DES, AES
 
WiFi Networking :
802.11b/b/n 16mbps
 
Bluetooth :
Low energy and classic
 
RTC :
Running at 32KHz
 
Range :
Node range: Up to 50km
 
Security & Certifications :
– SSL/TLS support up to 1.2
– WPA Enterprise security
– AES encryption engine
 
Memory :
– RAM: 4MB
– Flash Memory: 8MB
– GPIO: Up to 22
– Hardware floating point acceleration
– Python multi-threading
 
Power :
– Voltage Input: 3.3V – 5.5V
– 3v3 output capable of sourcing up to 400mA
 
Size :
55m x 20mm x 3.5mm (Without Headers)
 
Weight
– 7g
– 31g (Packaged)
 
 
Package Includes :
1 x FiPy - IoT development board

Write a review

Please login or register to review

FiPy - IoT development board

  • Product Code:Pycom-FiPy-Board
  • Reward Points:70
  • Availability:Out Of Stock
  • रo 6,972.00

  • Price in reward points:6972

  • 2 or more रo 6,665.00
  • 4 or more रo 6,637.00
  • 10 or more रo 6,609.00
  • 20 or more रo 6,581.00

Related Products

RedBearLab CC3200 WiFi board

RedBearLab CC3200 WiFi board

RedBearLab CC3200 WiFi board, is based on CC3200 module that is provided by Texas Instruments (TI). ..

रo 2,585.00 रo 3,985.00

WiPy 2.0

WiPy 2.0

Introducing the WiPy 2.0. The tiny Micro Python enabled WiFi & Bluetooth IoT development platfor..

रo 3,010.00

Expansion Board 2.0 for WiPy 2.0, LoPy, SiPy, FiPy and GPy

Expansion Board 2.0 for WiPy 2.0, LoPy, SiPy, FiPy and GPy

Introducing the Expansion Board 2.0, compatible with the WiPy 2.0, LoPy, SiPy, FiPy and GPy.   ..

रo 1,795.00 रo 1,985.00

PyCase

PyCase

PyCase is a new transparent case that will be able to hold either LoPy or WiPy and expansion board. ..

रo 1,093.00

SiPy

SiPy

The SiPy is a multi-network (Sigfox, WiFi and BLE) development platform. It is programmable with Mic..

रo 3,385.00 रo 4,641.00

GPy

GPy

Note: This is to preorder for shipping May 2017 Get on with a board that gets you into the new..

रo 6,611.00

LTE-M Antenna Kit

LTE-M Antenna Kit

LTE-M Antenna Kit   LTE-M cellular network antenna for use with the FiPy and GPy develo..

रo 1,230.00

PyCom GPy - WiFi, Bluetooth LE and LTE-M

PyCom GPy - WiFi, Bluetooth LE and LTE-M

With WiFi, BLE and cellular LTE CAT M1/NB1, the Pycom GPy is a triple-bearer MicroPython e..

रo 6,612.00

LoPy4

LoPy4

The LoPy4 is a compact quadruple network MicroPython enabled development board (LoRa, Sigfox, WiFi, ..

रo 5,252.00

PyGo1

PyGo1

Meet the PyGo1 which is in essence a LoPy4 module on steroids! We packed the LoPy4 in an IP67 case, ..

रo 9,427.00

PyGo2

PyGo2

Meet the PyGo2 which is in essence a FiPy module on steroids! We packed the FiPy in an IP67 case, ga..

रo 12,109.00

Pygate

Pygate

Pygate is Pycom’s latest hardware tech portfolio addition. This is a new super low-cost 8-channe..

रo 7,507.00

L01 OEM Module

L01 OEM Module

The L01 is the LoPy OEM module. It works just like the LoPy but we’ve trimmed a few bits to make it ..

रo 2,997.00

L04 OEM Module

L04 OEM Module

The L04 is the LoPy4 OEM module. It works just like the LoPy4 but we’ve trimmed a few bits to make i..

रo 3,629.00

Expansion Board 3.0 / 3.1

Expansion Board 3.0 / 3.1

The Expansion Board 3.0 is compatible with the WiPy 3.0,  LoPy4, SiPy, FiPy and GPy. Featur..

रo 2,403.00

Pysense 2.0 X

Pysense 2.0 X

Pysense 2.0 X is a 2nd Generation sensor shield which can be used with any Pycom multi-network modul..

रo 4,051.00

LoRa (868MHz/915MHz) and Sigfox Antenna Kit

LoRa (868MHz/915MHz) and Sigfox Antenna Kit

This universal LoRa & Sigfox Antenna Kit can be used with the LoPy, SiPy, LoPy4 and FiPy IoT Dev..

रo 1,230.00

Tags: FiPy, 2.0, tiny, Micro, Python

The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.

Name
Email
Phone
Comments