• PICAXE-08M2 Module AXE231

Surface mount PICAXE-08M2 microcontroller chip on a small board with breakout connections. This board is designed to be the smallest possible PICAXE project board! The input/output pins are all brought out to servo compatible headers (provided loose) so this module is ideal for small robots and radio-control models. A small socket connector for the AXE027 download cable is also provided. This can be easily soldered in place with a conventional soldering iron if required. A small socket connector for the AXE027 download cable is also provided. This can be easily soldered in place with a conventional soldering iron if required. The PICAXE-08M module provides a very small footprint PICAXE circuit for building into small projects. It is designed for ease of use with radio-control servos and other small electronic devices.

Assembly:

  • 1. The board is supplied with optional headers that may be soldered either side as desired.
  • Alternately wire connections may be soldered directly to the board.
  • 2. The board is supplied with an optional download socket that may be soldered onto the
  • reverse of the PCB (socket entry points upwards, so pins are in direct centre of solder pads).
  • Alternately programming connections may also be made via the pin headers.

    Use:

    • The module does not contain any power regulator, therefore the power supply must be in the range 3 to 5.5V DC. On ‘noisy’ servo supplies an external capacitor (e.g. 100uF) may also be required across the power rails.
    • The board has been designed to allow up to 4 servo (or other output) connections. Please see the pinout diagram and circuit for more details.
    • Pins 3 and 4 include on-board 10k pull down resistors so that  these pins may be used directly as inputs without any other modification.
    • Note that the LED pin must be connected to 0V for use (controlled by output pin 2). The LED is not connected by default so that very low power battery circuits do not need to supply the extra LED current drain. If the pin is left unconnected no extra power is used by the LED.
    • For further details about programming and use of the PICAXE-08M chips please see the full PICAXE manuals, available from www.picaxe.co.uk

    Documents:

    Package Includes:

    • 1 x PICAXE-08M Module PCB
    • 2 x 10 pin headers (snap in half to make 4x5)
    • 1 x PICAXE download socket

    Write a review

    Please login or register to review

    PICAXE-08M2 Module AXE231

    • Brand: PICAXE
    • Product Code:NR-PICAXE-AXE231-Module
    • Reward Points:17
    • Availability:In Stock
    • रo 1,725.00

    • Price in reward points:1725

    Related Products

    PICAXE-08M2 Microcontroller AXE007M2

    PICAXE-08M2 Microcontroller AXE007M2

    The smallest, but most popular, PICAXE microcontroller. Very popular in education due to its low cos..

    रo 395.00

    PICAXE-08M Module AXE230

    PICAXE-08M Module AXE230

    Surface mount PICAXE-08M (08M2 version coming soon!) microcontroller chip on a small board with brea..

    रo 1,350.00

    PICAXE-433MHz Radio Transmitter and Receiver Pair RFA001

    PICAXE-433MHz Radio Transmitter and Receiver Pair RFA001

    A pair of AM 433MHz licence exempt radio modules for wireless PICAXE projects. Transmit range up to ..

    रo 1,690.00

    PICAXE Budget Serial OLED Module AXE133Y

    PICAXE Budget Serial OLED Module AXE133Y

    Once you have seen an OLED display in use you will never want to use an LCD again! Much brighter dis..

    रo 1,685.00

    Tags: PICAXE, 08M2, Module, microcontroller, board

    The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.

    Name
    Email
    Phone
    Comments