This  16 MB HyperRAM + 32 MB HyperFlash add-on board is designed for use with Propeller 2 development board 2×6 accessory headers. Its dual 2×6 pass-through sockets stack on top of a pair of accessory headers on the P2 Eval Board (64000). It is also compatible with a P2 Edge Module Breadboard (#64020) or P2 Edge Mini Breakout Board (#64019) with a P2 Edge Module (#P2-EC) installed.

The P2-ES Eval Board HyperRAM & HyperFlash Add-on PCB comes fully assembled with surface-mount 16 MB HyperRAM and 32 MB HyperFlash, but supports all combinations of currently available hyper memory for users who prefer to change the memory configuration (de-soldering/re-soldering required) or to make their own from the open-source design files.

Features:

  • Dual hyper memory PCB populated with 16 MB HyperRAM and 32 MB HyperFlash
  • Dual 2×6-pin 0.1” passthough headers connect directly to P2 development board accessory headers
  • Optional hyper memory pins available on 0.1” pads for user configuration
  • PCB supports all combinations of hyper memory modules: 2x HyperRAM, 2x HyperFlash, 2x Dual-HyperRAM/Flash, or 1x HyperRAM with 1x HyperFlash (as sold)

Specifications:

  • RAM: 16 MB / 128 Mb (16 Mb x 8) Parallel PSRAM
  • Flash: 32 MB / 256 Mb (32 Mb x 8) Parallel NOR Flash
  • Voltage : +3.3 VDC (supplied by P2-ES Eval Board I/O LDO regulator)
  • Maximum clock rate : 100 MHz (200 MB/s) at 3.0 Vcc
  • RAM current: 60 mA peak burst, 600 µA standby (CS# = High)
  • Flash current: 100 mA peak burst, 25 µA standby (CS# = High)
  • Flash Endurance: 100,000 program/erase cycles
  • Flash Retention : 20-year data retention
  • Form factor: dual 2×6-pin female passthrough headers with 0.1″ spacing
  • Mounting hole: hole 2.5 mm (100 mil), pad ring 4.5 mm (180 mil) connected to GND
  • Operating temperature range: -40 to +185 °F (-40° to +85° C)
  • PCB dimensions: 1.0 x 1.9 in (25.4 x 48.3 mm)
  • PCB assembled, tested, and completed in Rocklin, California

Documentations:

Package Includes:

  • 1 x Parallax P2-ES Eval Board HyperRAM & HyperFlash Add-on

Write a review

Please login or register to review

Parallax P2-ES Eval Board HyperRAM & HyperFlash Add-on

  • Brand: Parallax Inc.
  • Product Code:NR-Plx-P2-ES-Eval-Board
  • Reward Points:73
  • Availability:In Stock
  • रo 7,290.00

  • Price in reward points:7290

  • 2 or more रo 7,230.00
  • 4 or more रo 7,175.00
  • 10 or more रo 7,115.00
  • 20 or more रo 7,055.00

Related Products

Parallax P2-ES Eval Protoboard Add-on

Parallax P2-ES Eval Protoboard Add-on

This prototyping board is designed for use with Propeller 2 development board 2×6 accessory headers...

रo 1,335.00

Parallax 64000 Propeller 2 Evaluation Board (Rev C)

Parallax 64000 Propeller 2 Evaluation Board (Rev C)

The limited edition Propeller 2 Eval Board Rev C is designed for experimentation and characterizatio..

रo 22,139.00

Parallax 64006-ES P2-ES Eval Board Accessory Set

Parallax 64006-ES P2-ES Eval Board Accessory Set

The P2-ES Eval Board Accessory Set is designed specifically for use with the limited edition P2-ES E..

रo 10,413.00

Parallax 64020 P2 Edge Module Breadboard

Parallax 64020 P2 Edge Module Breadboard

The Propeller 2 Edge Module Breadboard provides a convenient rapid prototyping solution for experime..

रo 9,269.00

Parallax 64019 P2 Edge Mini Breakout Board

Parallax 64019 P2 Edge Mini Breakout Board

The P2 Edge Mini Breakout Board is a minimalist but fully functional programming system for the P2 E..

रo 3,118.00

Tags: Parallax, P2, ES, Eval, Board, Add-on

The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.

Name
Email
Phone
Comments